ATPLAS Below Ground Boundary Box Sealed Ridgid Plastic Base 4 Port Multi-Manifold Benefits An oblong shaped chamber helps prevent rotation and is intended to transfer any torque resulting from meter installation / removal to the ground around, through the ’flat sides’ avoiding impact on service connections. The Rising-Spindle Stop-valve design helps minimise damage through possible over-tightening, using a piston and bore arrangement with positive stop points and torque failsafe in the key and valve cap. The box is also available with a quarter turn valve instead. Non-return valve can be replaced in-situ using appropriate tools and with regard for local regulations and working practices. Water flow is assisted by the DN20 nominal bore through the manifold, with its non-return valve adapted to suit the concentric G1.5 meter interface. The robust plastic surface box has a load bearing capacity of over 30 kN. Up to 6° tilt and 38mm of final height adjustment on the surface box allows for easy and accurate alignment with surface levels and gradients. The outlets on the multimanifold box have an ‘eye ball’ angular adjustment to help installation in congested trench conditions. 4 Port Multi-manifold box Sealed Telescopic Plastic Raised Manifold Part Number Rising spindle 4 Port Plastic - Raised 410-770mm Tilting Pluck Lid Frame/Cover Tilting Pluck Lid Frame/Cover + 180mm riser sections fitted as standard Lid marked ‘Water’ and incorporates metal detector plate 4 Port Plastic - Raised

Atplas Below Ground Boundary Boxes 2” BSP and 25mm push fit Class 1.R.C Feature Frame & Cover Universal 6° tilt 750mm by 200mm. Pluck lid (Lifting Handles incorporated). Glass Filled Polyester DMC. Grade C load bearing according to WIS 4-37-01 reference BS5384-2 Guard Tube Material Glass Filled Polyester DMC (Dough Moulding Compound) Guard Tube Profile 700mm by 160mm opening ~ Stadium profile Height Adjustment (approx) Sealed: 410mm to 770mm * 38mm final height adjustment in surface box * Height adjusted with 90mm and 180mm Riser sections Frost Protection Sealed: As standard in accordance with...