Universal wide tolerance flange adaptor SERIES 2200 LIBERTY Enables the mechanical jointing of a flange and a pipe, of different materials and outside diameters. Description • Wide tolerance range: an average of 21 mm. • Small number of models for a Nominal Diameter. • High performance: - Permanent leak tight joint when compressing the gasket between the end ring and the sleeve onto the pipe. - Anticorrosion protection: epoxy powder coating (200 μm) and Geomet 500® Gr. B for the bolts. • Ease and speed of installation: - Angular deflection ±6°. - Accommodates misalignment. - Absorbs expansion and contraction. - Important setting gap. • Conformity to standards: - F A 48-830: Foundry products - Spheroïdal graphite cast iron fittings N for PVC drinking water pipes under pressure. - N 545: Ductile iron pipes, fittings, accessories and their joints for E water pipelines - requirements and test methods. - N 1092-2: Flanges and their joints. E Part 2: Cast iron flanges. - SO 2531: Ductile iron pipes, fittings, and accessories and their joints I for water applications. - SO 7005-2: Metallic flanges and cast iron flanges. I - SO 7483: Dimensions of gaskets for use with flanges to ISO 7005. I • Approval: - Drinking water approved. • Nota: - his coupling does not resist to longitudinal forces and pipe pull T out will occur. Ensure adequate restraint is provided. - Not recommended for PE pipes. Technical data • Range: DN 300 to 500. • Maximal working pressure: PN 16. • Flanges drilling ISO PN 10/16 excepted ref. 2214-A drilled ISO PN 16 only. • Temperatures: from +0° to +60°C. • Torque: 60 to 70 Nm. • Drinking water networks. • Pumping, treatment, watertank. • Fire protection networks. • Irrigation networks. • Sewage networks and rain waters drainage (WC type - NF EN 681-1). • Sealing test according to standard ISO 2531. BELGICAST - SERIES 2200 LIBERTY UNIV

Universal wide tolerance flange adaptor 1 Flange 2 End-ring 3 Gasket 4 Bolts 5 Flange gasket for ref. 2211 to 2217 * Stainless steel on request Ductile iron /EN-GJS-500-7 Ductile iron /EN-GJS-500-7 EPDM Steel 8.8* Geomet® coating EPDM SERIES 2200 LIBERTY UNIVERSAL WIDE TOLERANCE FLANGE ADAPTOR DN Drilling Ref 300 300 OD mini OD maxi L A F B J mini J maxi Bolts mm mm mm mm mm mm mm mm A: he gasket already mounted on the product concerns the tolerance range of 425/448. T A second gasket is delivered and must be mounted instead of previous gasket to obtain tolerance range of 438/458. B: he gasket...