Drying | DRYPOINT® RA eco Tried and tested system, intelligently controlled: DRYPOINT® RA eco High energy saving potentials are created in compressed-air drying. Refrigeration dryers are always designed for the harshest conditions, that means that the benchmark is set for summer operation with high inlet and ambient temperatures. Only in rare cases are refrigeration dryers applied with constant full load. This results in high energy-saving potential with a dryer with energy-saving control. The DRYPOINT® RA eco eco refrigerated dryer series successfully implements and continues the DRYPOINT ® RA concept with low pressure loss, optimal heat exchanger design and BEKOMAT ® . Based on that, we have implemented two new control concepts for the different installation sizes, which directly adjust the drying performance to the demand and thereby considerably reduce the energy consumption. Leakage (Drainage) Conventional refrigeration dryers Up to 55% cost savings compared to conventional refrigeration dryers in the first 5 years by utilising intelligent control systems > Energy efficient and economical > Lowest pressure losses due to flow-optimised heat exchanger design > Lowest energy input through balanced refrigerant compressor technology > No compressed air loss due to effective condensate drainage with BEKOMAT® > Safe and reliable > Efficient condensate separation through integrated demister > Optimum protection of the refrigeration cycle > Easy to handle > Clear overview of all operating statuses > Continuous monitoring of condensate discharge > Unique alarm alerts > Timely maintenance and service information > eco advantages > Adjustment of power consumption to amended drying requirements > Energy saving with fluctuating volume flow > Active contribution to sustainability Better through Responsibility

The intelligent cycling system: DRYPOINT® RA 20-960 eco Energy efficiency by utilising intelligent cycling system For volume flow rates of less than 1,000 m3 / h, the DRYPOINT® RA eco operates as a cycling dryer in which the refrigerant compressor is switched off according to demand. The intelligent cycling system is executed dependent from the drying requirement and is regulated in such a way that the switching off times will be optimally extended. Volume flow ›› For volume flow rates <1,000 m3/h ›› Save energy costs with demand-driven switching for the refrigerant compressor ›› Display of percentage...

All models are equipped with a BEKOMAT® condensate drain as standard. | Option: Oil-free For dryer protection we recommend installing a CLEARPOINT® coarse filter (C, 25 pm) or finer upstream of the dryer inlet. Reference conditions according to DIN / ISO 7183 Operating conditions * other voltage ratings on request Correction factors Compressed air - Inlet temperature (°C)

Operating principle of the DRYPOINT® RA eco - refrigeration dryer In the DRYPOINT® RA eco refrigeration dryer, the air is dried via a counter-flow process with optimised heat exchange (Counter-Flow) along the entire process path, the air flows in a constant downwards aligned direction without diversions. The generously dimensioned counter-flow heat exchanger unit, which consists of an air-air and an air-refrigerant heat exchanger, among others, cools the compressed air to a temperature of around 3°C. The size and design of the heat exchangers promote effective cooling while minimising flow resistance....