network-capable condensate drain BEKOMAT i4.0
8Pages

NEW Condensate technology | BEKOMAT ® i4.0 ® BEKOMAT  i4.0 - progressive fusion of proven condensate drainage & digitalization During the processing of compressed air, the formation of condensate, mostly containing oil and contaminated with dirt particles, is unavoidable. To prevent malfunctions or even production downtimes, the condensate must be reliably discharged and without the loss of compressed air. Digitized process reliability Our proven BEKOMAT® condensate drains have been known for decades for their operational reliability, durability and ease of installation as well as their efficiency, cost-effectiveness and environmental friendliness. Now we are going one step further and enhancing the well-known functionality with the advantages of the digital world - for the extended benefit of the user. The new BEKOMAT® i4.0 series meets the expectations placed on IIoT-capable systems: Networkability, remote monitoring, flexibility and, above all, progressiveness. Important information, such as the current status or the time remaining until the next service, can thus be conveniently transmitted to a central control station. This increases process reliability and maintenance can be planned even more individually. › Digitization as standard › Connectivity and advanced communication › Connection to RS485 interfaces in control rooms or suitable compressors, filters and dryers. › Fully automatic operation and monitoring › Easy installation & low maintenance › Versatile connection option › Individual connection or in daisy chain topology with only one cable for data and power supply › Simple service › Transmission of important details helps your service to act quickly and efficiently › No loss of compressed air during discharge › Low operating costs › High reliability › Durable, insensitive to dirt and robust › No emulsion formation thanks to large valve cross sections › N

Efficient & reliable condensate drainage supplemented by communication & network capability: The new BEKOMAT® i4.0 series The BEKOMAT® condensate drain was BEKO TECHNOLOGIES' first product and has since been built more than 5 million times. It revolutionized the market, because for the first-time condensate could be drained off without the loss of compressed air. It replaced solutions, such as float drains or time-controlled solenoid valves, which in the event of malfunctions, allowed valuable and unused compressed air to escape into the environ- ment. Since then, the BEKOMAT® has been...

Data transmission and power supply via only one cable The new BEKOMAT® i4.0 condensate drains require only one cable for power supply and data transmission. The clever daisy chain wiring method, in which the cable is looped through from one device to the next, reduces the installation effort to a minimum and makes it possible to expand the system at any time. Planning reliability with cost transparency Visualization of the performance and function data of all connected condensate drains in real time enables simple and intelligent condensate management. For example, the status messages...

Technical data Technical data * Further information on the climate zones ( | a | ) on the reverse side. ** The short-term peak volume can only be achieved if the installation is correct according to the operating instructions. In case of doubt, an air equalization line is required.

Technical data Further information on the climate zones ( | ▲ | •) on the reverse side. The short-term peak volume can only be achieved if the installation is correct according to the operating instructions. In case of doubt, an air equalization line is required.

Technical data Discharge capacity Technical data Discharge capacity * Further information on the climate zones ( | ▲ | ) on the reverse side. ** The short-term peak volume can only be achieved if the installation is correct according to the operating instructions. In case of doubt, an air equalization line is required.

The climate - a key factor Depending on the climate and temperature, differing amounts of condensate can form. For the BEKOMAT® models, we therefore quote the performance values based on three climate zones: e.g. Northern Europe, Canada, Northern USA, Central Asia e.g. Central and Southern Europe, Central America e.g. Southeast Asian coastal regions, Oceania, Amazon and Congo regions Customizing and Private Design In addition to our serial products, we also offer individual OEM versions. Beside the external design such as color, logo, labeling, etc., this includes in particular the...

Matching maintenance kit As with all high-performance devices, the BEKOMAT® needs to be serviced from time to time. Our maintenance kits make this an easy task. If you require assistance, contact our service technicians, who are also qualified to examine and assess your entire compressed air system for further optimization. Do you have any further questions regarding the optimal treatment of your compressed air? We have the answers! We offer efficient solutions for any type treatment, filtration, drying, measuring and process technology, of processing chain. Please contact us with all your...