Filtration | CLEARPOINT® high pressure filterCLEARPOINT® high pressure filter 100 to 500 bar: Designed for harsh conditions As the pressure increases, the requirements for the utilised devices also increase. With a particularly robust housing and higher temperature resistance of up to 120 °C. The CLEARPOINT® high pressure filter provides numerous technical and economical advantages for reliable separation of solid material contamination, aerosols, oil vapours and odours. Quality in every detail The housing, filter element caps and support cylinder of our high pressure filter are produced from stainless steel - for good reasons: This enables us to prevent corrosion and guarantee a very long service life. CLEARPOINT® high pressure filters are available for pressure stages 100, 350 and 500 bar, optional with manual drain off and differential manometer. The right solution for every requirement The CLEARPOINT® high pressure filters for 100 to 500 bar are available in various degrees of filtration > Performance spectrum from 40 to 4,020 m3/h > All metallic components are made of stainless steel as standard > Determination of the economic element exchange by means of optional differential manometer > Element exchange also with confined spatial conditions > Protection of the housing screw connection via clamping screw > Simple filter element exchange by utilising a hook wrench > Comprehensive, complete documentation for traceability Better through Responsibility

Differential manometer > Type-dependent removal of large quantities of solid particles, aerosols, oil vapour and odours > Housing stainless steel 1.4301 > Permissible operating temperature: generally max. + 120 °C (HP350S075 and HP350M010 max. + 60 °C) > Design with differential manometer ** ** max. + 80 °C > Maximum operating pressure: 100, 350, 500 bar [g] > HP filter with manual drain for natural gas (CNG without differential manometer) on request Standard NPT, other threads on request. * At a deviating operating pressure please multiply the indicated volume flow at 100 bar [g] by the corresponding...

Advantages of the CLEARPOINT® high pressure filter 100 to 500 bar: No corrosion, no impairment of filter performance, no "eating" of the threads All metallic components are made of stainless steel as standard Determination of economic element exchange optional differential manometer Connections from installation size S045 upwards Element exchange also in confined areas Element connection either with screw thread (up to S040) or with plug connection (as of S045) Protection against loosening of the housing screw connection Lateral clamping screw prevents the lower part of the housing from screwing...