Emulsion splitter BEKOSPLIT
4Pages

{{requestButtons}}

Catalog excerpts

Emulsion splitter BEKOSPLIT - 1

Condensate technology | BEKOSPLIT® 11 | 12 | 13 | 14 | 14S | 15 | 16 For complex jobs: BEKOSPLIT® splits emulsions and treats condensates that are difficult to process Where condensate cannot be separated physically by gravity only, it must be split chemically, using an emulsion splitting plant. The BEKOSPLIT  reaction splitting plant is a reliable on-site processing solution for companies that need to treat emulsified condensate. This might occur as a result of unfavourable operating conditions or in connection with certain lubricant-compressor combinations. The process uses a special mineral clay to encapsulate organic compounds such as oil and solids that are not soluble in water in order to remove them the condensate. The discharge water can be safely disposed of through the foul drain. The BEKOSPLIT® has been type-approved by Deutsches Institut für Bautechnik (DIBt). ® By law, condensate must be disposed of safely. The BEKOSPLIT® emulsion splitting plants combine economy and ecology, as they enable you to process condensate at the point at which it occurs in a safe and cost-effective manner. Deutsches Institut für Bautechnik, Berlin BEKOSPLIT® is type-approved in Germany ›› Automated unit ›› ›› ›› ›› Display indicating operating state Sensor-controlled filling level monitoring Dosing unit for splitting agent Signal contact for error messages and maintenance alerts ›› Environmentally-friendly processing ›› Splitting agent made from highly effective clay minerals ›› No need for aggressive detergents ›› Huge reduction in waste volume to below 0.5% ›› Low-cost investment, operation and maintenance ›› 2-year warranty ›› Excellent discharge water quality

Open the catalog to page 1
Emulsion splitter BEKOSPLIT - 3

** for higher pressures: install high pressure relief chamber Technical data

Open the catalog to page 3
Emulsion splitter BEKOSPLIT - 4

BEKOSPLIT® consumables Over time, the splitting agent absorbs oil from the condensate and becomes saturated, so that it must be disposed of. We offer two standard splitting agents. For special products, please contact our technical department. Do you have questions about the best way of processing your compressed air? We have the answers! We offer efficient solutions for any type treatment, filtration, drying, measuring and process technology, of processing chain. Please contact us with your queries. and our comprehensive services. We would be delighted to tell you more about our...

Open the catalog to page 4

All BEKO TECHNOLOGIES GmbH catalogs and technical brochures

  1. Filtration

    20 Pages

  2. Drying

    32 Pages