Drying system DRYPOINT M eco control
6Pages

{{requestButtons}}

Catalog excerpts

Drying system DRYPOINT M eco control - 1

Drying | DRYPOINT® M eco control A class of its own: The electronically controlled DRYPOINT® M eco control membrane dryer The DRYPOINT® M eco control is the first drying system which has been developed that automatically responds to fluctuating operating conditions. Purge air, and energy, is only consumed when actual dryer performance is required. The compact DRYPOINT® M eco control combines low running costs with excellent operational safety and short response times. This is precisely why this product series also bears our eco seal. There are two operating modes to determine the dryers behaviour under fluctuating operating conditions (pressure, temperature and air volume): Constant Mode: Setting a stable outlet pressure dew point. Dynamic Mode: Stable difference between compressed air temperature and pressure dew point reduction. ›› Unique ›› Patented system made of proven components like membrane dryers, controls and sensors ›› Low maintenance ›› Constant high compressed air quality even under changing operating conditions ›› Individual adjustment of degree of drying ›› Safe ›› "Fail-safe" function: even in the event of a power failure the compressed air is dried reliably ›› Simple operation ›› Potential free contact ›› Energy-efficient ›› Energy consumption only when dryer performance is to be provided ›› Ideal for intermittent compressed air demand ›› Can be utilised at point of use as well as for the partial flow preparation ›› Network ready ›› Performance evaluation and display via an

Open the catalog to page 1
Drying system DRYPOINT M eco control - 2

The right operating mode for every application Compressed air temperature Ambient temperature Dynamic mode with lowering 15 Kelvin Constant Mode with PDP +5°C When it comes to fixed pressure dew points, the DRYPOINT® M eco control closes the gap between refrigeration and adsorption dryers. Depending on the requirements of your application, you can choose between two operating modes: "Constant Mode" when it comes to stable pressure dew points and "Dynamic Mode" when a safe difference to the compressed air temperature is crucial. The operating mode or the application-specific degree of drying...

Open the catalog to page 2
Drying system DRYPOINT M eco control - 4

* The intrinsic permeability is approx. <5 % relating to the max. purge air volume.

Open the catalog to page 4
Drying system DRYPOINT M eco control - 5

Operating principle for the DRYPOINT® M eco control The control software decides in cycles if and for how long the complete purge air volume is to be supplied in order to achieve and stabilise the required degree of drying. This process is implemented via a targeted timed sequence of a solenoid valve. The duration for both subsequent described process steps therefore varies in every cycle to retain the degree of drying within the specified tolerance range. Function: Measuring gas flows A very small partial flow of the dried compressed air (measuring gas) flows continuously through the...

Open the catalog to page 5
Drying system DRYPOINT M eco control - 6

Versatile application capability The electronically controlled drying system DRYPOINT® M eco control is versatile due to its special properties: Universal: when the degree of dryness should be set individually Efficient: Purge air and energy is only consumed when actual dryer performance is required, e.g. with fluctuating compressed air withdrawal Constant: when safely retained pressure dew point is also important with changing operation conditions Safe due to its "fail safe" function, it is protected against failure and always delivers dried compressed air Frost proof: When areas prone to...

Open the catalog to page 6

All BEKO TECHNOLOGIES GmbH catalogs and technical brochures

  1. Filtration

    20 Pages

  2. Drying

    32 Pages