Drying | EVERDRY® COMBITROC CT Efficient combination: the Heat Regenerating Adsorption Dryer EVERDRY® COMBITROC CT The EVERDRY® COMBITROC CT series provides the optimum processing combination of refrigeration and adsorption dryer. In principle, an energy-saving pressure dew point of +3 °C can be achieved with the refrigeration dryer. A lower pressure dew point is needed in the colder season to reliably avoid any condensation. The system then automatically activates the heat-regenerated adsorption dryer to generate a safe pressure dew point of below -40 °C. Another advantage of the combination: 100 % back up should one dryer unit fail. The EVERDRY COMBITROC CT is ideal for use in almost every climate zone. Desorption takes place in counter-flow to the adsorption direction with heated fan air, cooling is by means of fan-blown air. ® Local operating conditions and economical parameters ultimately determine the individual, customer-specific project solutions. Higher volume flow rates can also be achieved at the customer’s request. ›› Application Oriented Solutions ›› Added value by utilising comprehensive competence ›› Total concept instead of just individual components ›› Informative and user-friendly touch panel control systems ›› Easy to maintain ›› Reliable Process Management ›› Safe function monitoring with sensor technology ›› High-quality, high-temperature galvanising ›› Tried and tested, maintenance-friendly components ›› Energy-optimised Concept ›› Beneficial individual valves ›› Energy-ef

ZERO PURGE > Processing unit for adjustable Summer or Winter operation > Complete concept including piping, valves, pre-filter and after-filter > Adsorption dryer with back up function means: Can be used even when the refrigeration dryer is not available. *2 design model 1: 7 bar [g], inlet temperature 35 °C saturated, coolant max. 25 °C DTP + 3 °C *3 design model 2: 7 bar [g], inlet temperature 40 °C saturated, coolant max. 30 °C DTP + 5 °C Notice: The dimensions quoted are project data. Options and conditions at the place of installation may require adaptations.

Operating conditions* * Different conditions on request Reference conditions according to DIN / ISO 7183 *1 Volume flow relative to 20°C and 1 bar [a]. *2 design model 1: 7 bar [g], inlet temperature 35 °C saturated, coolant max. 25 °C DTP + 3 °C *3 design model 2: 7 bar [g], inlet temperature 40 °C saturated, coolant max. 30 °C DTP + 5 °C Notice: The dimensions quoted are project data. Options and conditions at the place of installation may require adaptations.

moderate subtropical tropical subtropical moderate cold Do you have questions about the best way of processing your compressed air? We have the answers! We offer efficient solutions for any type treatment, filtration, drying, measuring and process technology, of processing chain. Please contact us with your queries. and our comprehensive services. We would be delighted to tell you more about our condensate BEKO TECHNOLOGIES GMBH Im Taubental 7 | D-41468 Neuss carbon neutral natureOffice.com | DE-077-457728 print production Telephone + 49 2131 988 - 1000 [email protected] www.beko-technologies.com...