Process technology | CLEARPOINT® V Achieving minimum residual oil concentrations at affordable prices: CLEARPOINT® V activated carbon adsorber The CLEARPOINT® V activated carbon adsorber is the ideal solution for top quality compressed air with a residual oil content of maximum 0.003 mg/m³. The CLEARPOINT® V activated carbon adsorber is not only extremely efficient and reliable, but also very cost-effective. It has become an indispensable component in compressed air processing plants. Advanced overall design for outstanding performance. The perfect match CLEARPOINT® V activated carbon adsorbers are available as combined units including a METPOINT® OCV compact residual oil vapour measuring system. The METPOINT® OCV compact allows for the continuous online monitoring and documentation of the residual oil vapour concentration measured directly at the compressed air outlet of the activated carbon adsorber. The METPOINT® OCV compact boosts the process safety of your system. ›› Efficient oil vapour adsorption with special activated carbon ›› Reduced operating costs thanks to low differential pressure and long service life ›› Complete solution with oil-free dust filter ›› Available with optional oil test indicator or METPOINT OCV compact residual oil content monitoring unit for extra safety i

Residual oil aerosol and vapour content at outlet: better than DIN ISO 8573-1 class 1 (max. 0.003 mg/m3 at 20 °C and 1 bar [a]) for solids up to 1 pm; for more stringent requirements, install 0.01 pm dust filter Inlet air: Pressure dew point < 7 °C (corresponding to rel. humidity < 35% at 25 °C or 20% at 35 °C) Residual oil aerosol concentration max. 0.01 mg/m3 at 20 °C and 1 bar [a] Note: At high oil aerosol concentrations (> 2 mg/m3) at the inlet, install multi-stage prefiltration Adsorber operating temperature: max. 50 °C, recommended 35 °C Max. operating pressure: 16 bar [gauge], from L 295...

Residual oil aerosol and vapour content at outlet: better than DIN ISO 8573-1 class 1 (max. 0.003 mg/m3 at 20 °C and 1 bar [a]) for solids up to 1 pm; for more stringent requirements, install 0.01 pm dust filter Inlet air: Pressure dew point < 7 °C (corresponding to rel. humidity < 35% at 25 °C or 20% at 35 °C) Residual oil aerosol concentration max. 0.01 mg/m3 at 20 °C and 1 bar [a] Note: At high oil aerosol concentrations (> 2 mg/m3) at the inlet, install multi-stage prefiltration Adsorber operating temperature: max. 50 °C, recommended 35 °C Max. operating pressure: 16 bar [gauge], from L 295...

Do you have questions about the best way to achieve high quality compressed air? Then we have the answers! We offer efficient solutions for any treatment, filtration, drying, measuring technology and process type of processing chain. Please contact us with all your queries. technology, as well as our extensive services. We would be delighted to tell you more about our condensate BEKO TECHNOLOGIES GMBH Im Taubental 7 | D-41468 Neuss Tel. + 49 2131 988 - 1000 [email protected] www.beko-technologies.com cai nature* pri, carbon neutral natureOffice.com | DE-077-457728 print production MIX...