Catalogs >
BEKA >
BA590

BA590
2Pages

Catalog excerpts

BA590 LED Cluster Lamp General purpose ♦ Red, amber, green, blue & white models. ♦ Long life - typically more than 10 years. BA590 series cluster lamps are solid state panel mounting indicators which offer a high reliability alternative to conventional panel lamps incorporating a filament bulb. Very low current consumption and a ten year life minimise maintenance costs by totally eliminating routine bulb replacement. Each BA590 contains a group of high efficiency light emitting diodes mounted behind a coloured diffuser to produce a bright, uniform output with a typical life greater than ten years. All BA590 models contain a 20mA current regulator which maintains constant brilliance over a wide range of supply voltages. Five well defined colours - red, amber, green, blue and white comply with the indicator light colour requirements specified in IEC204-1, allowing all plant conditions to be annunciated. IP65 sealing of the lens and the joint between the lamp and the panel makes the BA590 ideal for installations in areas that will be hosed, washed or splashed. When environmental protection behind the panel is also required, an optional rear sealing assembly is available. Mounting is via a single industry standard 22.5mm diameter hole. The lamp housing, fixing nut and terminals have a maximum diameter of 30mm which permits a very high packing density on the panel. To aid identification from the rear of the panel, the model number and suffix which identifies the colour are marked on the lamp body close to the terminals. Reliability is ensured by an ISO9001 approved quality control system supported by a three year guarantee. If flammable atmospheres are present the complementary BA390 or BA390S intrinsically safe cluster lamps should be used. These have the same features as the BA590 but have been certified for installation in all gas hazardous areas.

Open the catalog to page 1

Environmental Operating temperature Storage temperature Operating life Enclosure Front IP66 IP20 - see accessories for Rear optional IP65 rear sealing assembly. EMC accordance with EU Directive In 2004/108/EC Immunity degradation of brightness No for 10V/m . Emissions Electromagnetically benign. Mechanical Terminals Lens material Lamp body Weight Screw clamp for 1.5mm². Polycarbonate Nylon 6 18g Single fixing hole 22.5mm ±0.2mm Fixing centres for maximum packing density. Special tool may be required to tighten fixing nuts when minimum spacing is used. Output Lamp colour Red Amber Green Blue...

Open the catalog to page 2