MLD 9000 DIGITAL HEADLIGHT AIMING TESTER: TÜV-CERTIFIED, FOR ALL LIGHT SOURCES, ALL LASERS (MAX. CLASS 2)

Beissbarth MLD 9000 digital headlight aiming tester Digital headlight aiming tester with 4 lasers Testing and adjusting headlights in the workshop MLD 9000 for all testing and calibration work Digitization and the increase of driver assistance systems in motor vehicles also had a large impact on the lighting systems. Nowadays not only luxury class cars have intelligent LED and matrix headlights are on board. Modern lighting systems – for small cars initially mainly offered as optional extras – are often included in the standard versions after the first facelift. Therefore the demands on the workshop...

Optional: Laser kit for alignment with the vehicle’s symmetrical axis (class 1 laser) Alignment laser for the horizontal alignment with vehicle characteristics (towards the transversal axis) Switch and handle for alignment laser Counterweight system with toothed belts Torsion-free and specially hardened aluminium column for high mechanical precision (+/-0,1 %) Can be turned 30° for its alignment with the vehicle 7“ touch screen high-resolution TFT, LED Manual height marker on the aluminium scale (as standard). The scale is height-adjustable to compensate for the height of the vehicle set-up area....

Three options for uneven test bays Rail system, inclinometer, LT B In case the test bay for the headlight aiming tester does not comply with the regional specifications, MLD 9000 can still be used for testing if the floor conditions allow so. LASER 1 Rail system or software-based tilt compensation Measurement of the tilt angle Compensation by means of software Standard headlights Workshop Alignment with the vehicle body (DLA, Matrix) Alignment with the symmetrical or driving axis (e.g. Ford ILS, Mondeo) General inspection Low-beam testing at the general inspection Levelled rail system Once-only...

Option 2: Inclinometer (MLD 9000 on standard rollers) for minor unevennnesses On the standard version with rollers, the inclinometer is used to compensate inclinations of the headlight aiming tester set-up bay of up to 3 %. For this purpose, the inclination is measured in both longitudinal and transverse directions. This information is used to correct the data displayed on the screen. That is, the value shown on the display will be the same as if the MLD 9000 was absolutely levelled. Attention: The mechanical position of the alignment laser is defined by the actual position of the carriage. In...

MLD 9000 Networking functions Functions: 1 Customer database 2 Archive/database 1 3 Messuring functions: a) fast test b) free test c) official test 4 rotocol printout/network P data storage (FTP) 5 irrored screen/ M 2-way communication 3 6 SA network via A Beissbarth order agent 7 Bosch Connected Repair Comparison of measured values with limit values and clear red/green evaluation License plate Measurement protocol Vehicle category Overall result (not OK) Measuring time Test result: – n the right o (not OK) – on the left (OK) Height deviation Lateral deviation Adjustment (left) within the allowance...

Reliable adjustment of headlights with glare-free high beam* Yellow: tolerance range Red: incorrect Blue: correct Adjustment of headlights with DLA high-beam assistant (test image control via vehicle ECU diagnosis) MLD 9000 supports its operator at testing and adjustment of intelligent headlight systems • Dynamic Light Assist – DLA • Matrix • HD Matrix 2 • ILS Ford • Ford Matrix • echanical adjustment of the vertical cut-off line M (e.g. DLA, ILS) • easurement of the vertical cut-off line via MLD 9000 M software – with an accuracy of a single angular minute (e. g. in case of Matrix Beam) • Škoda...

MLD 9000 Complete range with all options Digital image processing with (5 MP) CMOS camera for measurement results with live images in real time Visual and acoustic signals support the measurement procedure 7“ touch screen, TFT, LED – can also be operated with work gloves Optional: Log printer on the back of the light box The operating panel is swivel-mounted into the light box. A single push allows the operator to switch the viewer direction – front for testing and back for for adjustment. The reading direction of the screen is switched simultaneously and automatically.

Scheinwerfer mit Dynamischem Fernlichtassistent (DLA) Die folgende Abbildung illustriert die wichtigsten Messgrößen für Scheinwerfer mit Dynamischem Fernlichtassistent (DLA). Nebel-Scheinwerfer links wählen Die folgende Abbildung illus ßen für Scheinwerfer mit M Adjustment of all types and light sources Xenon, bi-xenon, LED, bi-LED, halogen h Bedeutung Icon Bedeutung Nebel-Scheinwerfer rechts wählen M1G1): Offroad Fahrzeug max 8 Sitze Bedeutung Icon Bedeutung A Erklärung t max 8 Sitze Nebel-Scheinwerfer links wählen M11): Pkw, Transporter bis h der Messwerte | MLD 9000 |h‘19 de 3,5 Nebel-Scheinwerfer...

Absolutely symmetrical Upgrade: vertical laser Optional MLD 9000 upgrade P-Assist S5 An additional vertical laser makes it easier to use the symmetrical axis as an alignment aid. An alignment pendulum at the back or a positioning device for the roof antenna serve as reference points. (This alignment method requires a levelled rail system.) Positioning target for the roof antenna On the laser visor: Reflector board on the pendulum Practical pendular fixture either with magnet clamp or vaccum cup Positioning target for the roof antenna P-Assist S5: Laser class 1 MLD 9000: Laser class 2

Technical data Model versions and special accessories MLD 9000 – versions Description Order numbers Without inclinometer RAL 7040 (grey) MLD 9000 Standard with inclinometer Including inclinometer RAL 7040 (grey) MLD 9000 Standard with integrated printer Including on-board printer Special accessories for MLD 9000 Description Order numbers Height measurement sensor Dust cover P-Assist S5 vertical alignment laser Laser clamp Alignment pendulum Kit (laser clamp, alignment pendulum) Positioning device for antenna Bosch Connected Repair Bosch Connected Repair + WLAN stick WLAN stick for connectivity...