MSC-N series
2Pages

{{requestButtons}}

Catalog excerpts

MSC-N series - 1

MSC-N series MPPT solar charge controller EPSOLAR TECHNOLOGY Overview MSC-N series is a new generation of the solar controller with a two-way load output. The two-way load output voltage can be switched to 12V or 24V DC freely by an enable switch. According to the battery voltage, the two-way load output voltage can be turned off in stages to ensure the load1 output. The two-way load output adopts a high-efficiency buck-boost conversion circuit, which greatly reduces the invalid loss of the battery and improves the service time of the battery. The MPPT charging technology can fast track the max power point of solar panels in any situation and obtain the maximum energy in real-time. It can increase the utilization ratio of solar energy by 20%-30% compared with the PWM charging method. Charging current limit, charging power limit, and high temperature charging power automatic reduction of function, fully ensure the system stability of access to excess PV modules and high temperature running. Adaptive three-stage charging mode and comprehensive electronic protections such as over-charge, over-discharge, PV & battery reverse polarity, etc. effectively ensure the power supply safer, more stable, and more durable. MSC-N series controllers are most suitable for applications in the field of security monitoring, RV, and household system, etc. Features MPPT tracking efficiency up to 99.5% Maximum charging transfer efficiency up to 98.6%, full load efficiency up to 96.6 % Optional charging prior mode and load prior mode Support the lead-acid and lithium batteries Support no-battery mode, PV array powers load directly Constant voltage output of two-way load Freely set output voltage level Configurable cut-off voltage value, ensuring power supply for main load RS485 com. port to realize remote control Solar Home Solar Backpack Solar Boat Solar Street Light Solar Power Generator

Open the catalog to page 1
MSC-N series - 2

Battery rated voltage 12/24VDC ★ Auto-recognition 24VDC 24VDC ♦ When an LFP or LNCM battery is used, the temperature compensation coefficient will be 0, and can't be changed. © No.103, Dongxing Rd, Chenjiang Street, Zhongkai High-tech Zone, Huizhou, China ©+86-752-3889706 © www.epever.com (§) info@epsolarpv.com

Open the catalog to page 2

All Beijingepsolartechnology Co. catalogs and technical brochures

  1. EZPower

    2 Pages

  2. LS-B Series

    2 Pages

  3. VS-BN Series

    2 Pages

  4. VS-AU Series

    2 Pages

  5. inverter

    3 Pages

  6. charge

    2 Pages

  7. charge

    2 Pages

  8. charge

    2 Pages

  9. charge

    2 Pages