Catalogs >
Beijing Worldia Diamond Tools Co., Ltd >
PCBN Face Milling

PCBN Face Milling
16Pages

Catalog excerpts

Case Studies Produce Support

Application of WORLDIA®PCBN Indexable Face Milling Cutters WORLDIA® PCBN Indexable Face Milling Cutters used for face milling cast iron, with the best perfomance to ensure the requirements of surface roughness and geometric tolerances. • Cutter body made by forging Alloy-Steel,all setting parts are completed by hard milling with five axle maching one time • High-precision pocket seats keep 0.01 mm positioning precision without insert adjustment • The adjustment structure is simple and easy to use. The inserts can be easily adjusted to 5 micron axial run out within the 0.3mm range. *...

Open the catalog to page 4

Position surface

Open the catalog to page 5

WORLDIA®PCBN Indexable Face Milling Cutters used for face milling cast iron. Specifications Type Spare Parts D Wrench

Open the catalog to page 6

Coding Rules of PCBN Milling Inserts Clearance angle Chip breaker and Fixing type

Open the catalog to page 7

Coding Rules of PCBN Milling Inserts Tool cutting edge angle Cutting edge design Cutting direction Cutting edge design

Open the catalog to page 8

Cubic boron nitride is the second hardest material in the world invented successfully in 1957; the microhardness of CBN’s single crystal is HV8000-9000 while the hardness of PCBN is HV2500-5000, so it is considerably better abrasive resistance than tungsten carbide and ceramics.With a higher ability of oxidation resistance within 1000°C, CBN will do not have any chemical reaction together with ferrous material in 1200-1300°C. So it is unique for CBN material dry cutting ferrous materials. The principal application areas for CBN cutting tools are hardened steels, cast irons and sintered...

Open the catalog to page 9

PCBN Grade PNK0119 PNK3019 Cutting Data Recommendations Cutting Edge Recommendation High A

Open the catalog to page 10

Inserts are designed by variety of Kr, could meet different application of end milling and shoulder milling.

Open the catalog to page 11

Material: HT250 Tool: WORLDIA® PCBN Indexable Face Milling Cutters Cutting Data: Vc=800m/min n=1270 f=6.00mm/r fz=0.25mm/Z Material: HT250 Tool: WORLDIA® PCBN Indexable Face Milling Cutters Cutting Data: Vc=500m/min n=800 f=6.00mm/r fz=0.25mm/Z Material: QT450 Tool: WORLDIA®PCBN Indexable Face Milling Cutters Cutting Data: Vc=400m/min n=1000 f=1.28mm/r fz=0.08mm/Z

Open the catalog to page 13

Worldia Product Supports Under current cutting condition during machining, WORLDIA can provide the most reasonable, scientific process and design to customers depends on our fully experience to ensure the high efficiency.

Open the catalog to page 14

Worldia Cutting Tools Catalogues More information on Http^/www. woridia-tools.com

Open the catalog to page 15

www.worldia-tools.com Tel: +86-10-58411388 Fax: +86-10-58411388 ext 8131 Office Add: H-03, 5F, M7 Building, No.1 Jiuxianqiao East Road, Chaoyang District, Beijing, China Factory Add: No.2 Industry Road, Dachang Chaobaihe Industrial Park, Langfang City, Hebei Province 065300, China E-mail: info@worldia-tools.com

Open the catalog to page 16