Cartella_Dornstab_korr.indd table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:11.00pt "Microsoft Sans Serif", sans-serif; } .font1 { font:15.00pt "Microsoft Sans Serif", sans-serif; } Automatic Dual Wave Soldering Machine TB880C Basic feature. ©Synchronous PCB board input system which runs with chain claw to ensure reliable, durable and no noise, stable transmission. © Control system is touch display operation, cooperating with Siemens PLC control system ©New supercharged flux coating system, spay is even, which can decrease the usage of the flux. © Built-in industrial PLC cooperating with Touch Display controls each technique parameter of soldering to ensure soldering quality © It used imported motor, device, dual wave crest system to ensure wave stable Preheating part uses Far-IR heater, preheating temperature is even and heat efficiency is good. © Prevent temperature goes down and improve temperature control accuracy.

Cartella_Egon_korr.indd table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:10.00pt "Arial", sans-serif; } Tin pot uses high efficient heater, tin melt speed is fast, which can save energy at max extent. Standard configuration Parameter TB880 TB880C PCB Board width Max 250mm Power supply AC380V ( 3 phase, 4 wires) General Power 13KW 14KW Max capacity of Tin pot 300KG (Sn63Pb37) 300 KG(Sn96) Temperature Range 0-300°C Flux coating method Spray Spay air pressure 0.25Mpa~0.4Mpa Driving speed 0.5-3m/min stepless speed adjustable Transmission motor power 90W Wave height range...