Cartella_Dornstab_korr.indd table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:8.00pt "Microsoft Sans Serif", sans-serif; } .font1 { font:9.00pt "Microsoft Sans Serif", sans-serif; } .font2 { font:14.00pt "Microsoft Sans Serif", sans-serif; } Double wave and lead-free Wave soldering machine TB780D I Flux spray system. A function of flux spray device 1 nozzle: import nozzle (Japanese ST-6), better spray effect 2 air system: AIRTAC electromagnetism valve, anti-corrosive pipe 3 nozzle moving system: driven by air cylinder, spray speed and spray width can be adjusted by handle. 4 flux filtering system: flux collecting device is made of multi-layer collecting, it is easy to clean. 5 flow control: anti-corrosive flow meter control and display flux flow. B function of flux foam device With foam function, inner foam pump, it don't need outer air supply, it is convenient to spray flux. 1 preheating temperature range: room temperature260°C 2 control way: PID individual temperature control to ensure welding technique. 3 Heating: infrared ray heating, temperature uniformity, rapid speed PID supply heat. 4 Preheating security: temperature on surface is lower than fire point of flux. 5 Preheat effect: it can meet preheating requirement of PCB welding on mass production, uniformity temperature. II Welding system features: 1 Material: 316 stainless steel 2 Capacity: 130kg double wave crest capacity for saving money for your invest at the first time. 3 Height range of wave crest: 0ח8mm adjustment and keep wave crest balance. 4 Power consumption (heater): 6kw, uniformity heat, long life. It will take 1 hour to melt tin. This can save 6kw per hour during melting tin and save 3kw during constant temperature, which will help you to save power. 5 Unique nozzle: double wave crest design with unique flat flow technology which will bring in stable wave crest to reduce SMD leak soldering. 6 Heat control system: PID temperature control, accuracy is ±2C 7 Tin pot moving way: move in or out by hand. 8 Motor of wave crest: import motor, running stable. 9 Tin pipe: screw thread stem Import motor The position of tin pot and wave hole

Cartella_Dornstab_korr.indd table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:8.00pt "Microsoft Sans Serif", sans-serif; } .font1 { font:9.00pt "Microsoft Sans Serif", sans-serif; } Tll Cooling system 1 Cooling motor: unique cooling design, It can achieve the effect of import Brand device. IV Transmission system 1 claw chain: stainless steel chain, anti-corrosive, ametabolic. 2 guiderail system: special aluminum material, strong and solid, can be adjust able 3 transmission speed: 01800mm/min 4 Accuracy: motor is from Taiwan, it is easy to adjust and maintain. V Control...

Cartella_Dornstab_korr.indd table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:8.00pt "Microsoft Sans Serif", sans-serif; } .font1 { font:9.00pt "Microsoft Sans Serif", sans-serif; } .font2 { font:9.00pt "Times New Roman", serif; } Tin spot's up and down , in and out by hand, easy to adjust Օ Stepless electric speed adjustment on transmission system, transmission speed is stable. It can call the saved technical parameter at any time, Օ Start wave crest automatically when PCB passes to decrease tin oxygen level at max extent. Uses PID close-loop control method on...