Ultrasonic Hardness Tester TIME5630 (UCI)

1 / 1 PageView full catalog

Ultrasonic Hardness Tester TIME5630 (UCI)

Product catalog summary

Technical Specification

Standard Delivery: Includes main unit, 10N manual probe, standard test block, V-shape base, probe cable, charger, TIME certificate, warranty card, and instruction manual.

Features

Nondestructive testing for hardened layers and thin workpieces.
3.5-inch color LCD screen with battery status and low battery alarm.
Conversion between hardness scales: HV, HB, HRC.
Calibration and deletion of calibration for hardness values.
Material selection for testing, primarily steel and cast steel, with calibration for alloy tool steel, special cast iron, and non-ferrous metals.
Large memory with built-in 8G SD card.
Free measurement in all directions without compensation.
Displays maximum, minimum, average values, standard deviation, measurement times, and previous values.
Upper/lower limits setting with alarm for out-of-limit values.
Rechargeable lithium-ion battery with over 30 hours of continuous working time.
Portable stand for enhanced measurement accuracy.

Measuring Range

80~1042HV; 100-450HB; 20-70HRC

Loading Force

Measuring Accuracy

±4% (<500HV), ±5% (500HV~800HV), ±6% (>800HV)

Repeatability

8% (<250HV), 6% (≥250HV)

Indenter

Vickers diamond indenter

Measuring Direction

Supports 360°

Hardness Scale

HV, HB, HRC

Dimensions

170x75x40 mm

Weight

500 g

Applications

Suitable for measuring strip/plate workpieces, mold hardened layers, blade hardened layers, tooth surface hardened layers, flange edges, wheels, turbine rotors, thin plates, shafts and pipes, containers, knife edges, welding parts, etc.

Catalog excerpts

Ultrasonic Hardness Tester TIME5630 (UCI)-1

Beijing TIME High Technology Ltd. Applications It can measure strip/plate workpiece, mold hardened layer, blade hardened layer, tooth surface hardened layer, flange edge, wheel, turbine rotor, thin plate, shaft and pipe, container, knife edge, welding part, etc. Standard Delivery ●Main unit ●10N manual probe ●Standard test block ●V-shape base ●Probe cable ●Charger ●TIME certificate ●Warranty card ●Instruction manual Features ●Nondestructive hardness tester for testing hardened layer and thin workpieces ●3.5-inch color LCD screen ●It indicates the battery status and alarms in low battery ●Conversion of common hardness sales (HV, HB, HRC) ●Hardness value calibration and delete calibration ●Select the tested material, mainly steel and cast steel. After calibration with the standard test block, it can measure alloy tool steel, special cast iron and non-ferrous metals ●Large memory: built-in 8G SD card. ●Free measurement in all directions, no compensation is needed. ●It can display the maximum value, minimum value, average value, standard deviation, measurement times, previous measurement values, etc. ●Upper/lower limits setting and alarm when out of the limits ●Rechargeable lithium ion battery, continuous working time is more than 30 hours ●Portable stand to enhance the measurement accuracy. Technical Specification Measuring range Loading force Measuring accuracy ULTRASONIC HARDNESS TESTER vickers diamond indenter Measuring direction Hardness scale

Open the catalog to page 1