TNS-S Series Spring Torsion Testing Machine

1 / 1 PageView full catalog

TNS-S Series Spring Torsion Testing Machine

Product catalog summary

Technical Specifications

Models: TNS S50, S100, S200, S500, S1000, S2000, S5000, S10000, S20000, S50000, S100000, S200000
Max Torque (N.mm): Ranges from 50 to 200000 depending on the model
Resolution (N.mm): 0.01 for lower models, 0.1 for mid-range, and 1 to 10 for higher models
Max Torsion Angle: 9999.9°
Min Reading of Torsion Angle: 0.1°
Accuracy: +/-1%
Max Distance Between Torsion Plates: ≤70mm to ≤260mm depending on the model
Loading: Manual
Machine Size: 600x500x400mm to 900x500x600mm
Net Weight: 50kgs to 180kgs
Measuring Scope: 10-100% of full scales
Diameter of Plate: 100mm
Power Supply: AC, 220V 50Hz

Applications

The TNS series testing machine is primarily used for testing the torsion angle and torque of various torsion springs, coil springs, elastic components, and other friction structures.

Features

Composed of a torsion transducer, photoelectric encoder, measurement amplifying circuit, and single-chip processor.
Digital display of torsion angle and torque.
Pre-set upper and lower torque limits for 4 points with automatic qualification checks.
Automatic revision of angle displacement of torsion transducer.
Includes peak value holding, overload protection, torque stiffness calculation, and data retrieval functions.

Catalog excerpts

TNS-S Series Spring Torsion Testing Machine-1

Beijing TIME High Technology Ltd. TNS-S Series SPRING TORSION TESTING MACHINE Features ●The tester consists of torsion transducer, photoelectric encoder, measurement amplifying circuit and single chip processor. The torsion angle and torque are digitally displayed. ●It can pre-set the upper and lower limits of torques for 4 points and automatically check whether four test points are qualified. ●Automatically revise the angle displacement of torsion transducer. ●Functions of peak value holding, overload protection, torque stiffness calculation and data retrieval, etc. Applications TNS series testing machine is mainly used for testing the torsion angle and torque of various torsion springs, coil springs, elastic components and other friction structures. Technical Specification Model Min. reading of torsion angle (°) Max. distance between 2 torsion plates Machine size Measuring scope Power supply

Open the catalog to page 1