Single Tension Testing Machine WAW-E Series

1 / 2 PagesView full catalog

Single Tension Testing Machine WAW-E Series

Product catalog summary

Features

Long travel double-action oil cylinder with high accuracy and close sealing for various specimen lengths and high elongation specimens.
High stiffness load frame with low gravity center to minimize noise and vibration during specimen breakage.
Upper oil cylinder design with down-setting tensile space for easy operation.
GTM Double-Flange double direction load cell ensures high linearity and test result accuracy.
Non-step operation across the full testing range.
High-quality hydraulic components to prevent leakage and protect the environment.
MOOG DDV D633 Servo Valve for high response speed and control accuracy.
Self-detection for overload, overflow, and over-temperature.
Close-loop control system with modes for test load, displacement, and deformation, allowing smooth transitions.

Single Tension Testing Machine

The WAW-E Servo Hydraulic Tensile Testing Machine is designed for high-efficiency tensile tests. It can also perform compression, bending, and shearing tests with appropriate fixtures. It supports constant strain, stress, and displacement tests, adhering to GB, ASTM, DIN, ISO, JIS, BS metal tensile testing standards. Ideal for testing metal rods, boards, screws, and steel strands.

Technical Specifications

Model	WAW-600E	WAW-1000E	WAW-2000E
Machine Class	Class 0.5	Class 0.5	Class 0.5
Max. Test Load (kN)	600	1000	2000
Load Measuring Range (kN)	6~600	10~1000	20~2000
Test Load Indicating Accuracy	≤±0.5% of Indicating Value
Displacement Resolution (mm)	0.005
Displacement Accuracy	≤±0.5% of Indicating Value
Deformation Resolution (mm)	0.001
Ram Stroke (mm)	580	680	680
Max. Jaws Distance (mm)	600	700	700
Deformation Measuring Accuracy	≤±0.5% of Indicating Value
Overload Protection	≥5% of Full Range
Clamping Method	Hydraulic Horizontal Clamping
Control Speed	Up: 160mm/min, Down: 200mm/min
Round Specimen Clamping Range (mm)	φ13-φ40	φ13-φ60	φ15-φ70
Flat Specimen Clamping Range (mm)	0-30	0-60	0-80
Column Quantity	4
Load Frame Dimension (mm)	1000×750×3580	1000×750×3580	1250×900×4000
Power (kW)	11
Load Frame Weight (kg)	Approx. 3500	Approx. 6000	Approx. 9000
Horizontal Clamping System	Fast Speed Double Acting Piston Software Interface

Catalog excerpts

Single Tension Testing Machine WAW-E Series-1

Beijing TIME High Technology Ltd. WAW-E Series SINGLE TENSION TESTING MACHINE WAW- E Servo Hydraulic Tensile Testing Machine is mainly used for tensile test with high efficiency requirement. Equipped with relevant fixtures, this machine can also be used for compression, bending and shearing tests. Constant strain, Constant stress and constant displacement test are available. Strain velocity, stress velocity and displacement velocity conform to the requirement of GB, ASTM, DIN, ISO, JIS, BS etc. metal tensile testing standards. It is an ideal equipment for tensile test of metal rod, board, screw, steel strand (with special fixture) etc. material with high stiffness. Features ●Long travel double-action oil cylinder with high accuracy & close sealing to meet the requirement of different specimen lengths or specimen with high elongation. ●High stiffness load frame with low gravity center. Impact with specimen broken was released by hydraulic unit to decrease the noise and vibration maximally. ●Upper oil cylinder design with down-setting tensile space makes the operation very easy. ●GTM (Germany) Double-Flange double direction load cell with high linearity to ensure the high accuracy of test result. ●Non-step in full testing range. ●High quality hydraulic components to avoid the leakage and protect the testing environment. ●MOOG (USA) DDV D633 Servo Valve ensures high response speed and high control accuracy. ●Over-load, over-flow, over-temperature self-detection. ●Close-loop control system with test load, displacement, deformation control modes, and a smooth switch among e

Open the catalog to page 1

Single Tension Testing Machine WAW-E Series-2

Beijing TIME High Technology Ltd. Horizontal Clamping System Fast Speed Double Acting Piston Software Interaface Technical Specification Model Machine Class Load Measuring Range (kN) Test Load Indicating Accuracy Displacement Accuracy Max. Jaws Distance (mm) (Including piston stroke) Deformation Measuring Accuracy Overload Protection Clamping Method Hydraulic Horizontal Clamping Control speed Round Specimen Clamping Range (mm) Flat Specimen Clamping Range (mm) Column Quantity Load Frame Dimension (mm) Load Frame Weight (kg)

Open the catalog to page 2