Computer Controlled Electronic-hydraulic Servo Testing Machine WAW-C Series

Product catalog summary

Overview: The WAW-C Series by Beijing TIME High Technology Ltd. is a computer-controlled electro-hydraulic servo testing machine designed primarily for tensile testing with high efficiency. It can also perform compression, bending, and shearing tests, adhering to various international standards such as GB, ASTM, DIN, ISO, JIS, and BS.

Features:

Load frame with oil cylinder at the bottom for stability.
Clearance sealing on the oil cylinder piston for extended usage.
Lower crosshead movement driven by a plate motor, worm wheel, and worm.
Imported oil pump and servo valve for high accuracy control.
Equipped with TIME's proprietary controller and software.

Technical Specifications:

Models: WAW-300C, WAW-600C, WAW-1000C, WAW-2000C, WAW-3000C.
Max Test Load: Ranges from 300 kN to 3000 kN depending on the model.
Load Measuring Range: 2%-100% of max capacity.
Accuracy: Load and displacement indicating accuracy ≤±1%.
Deformation Resolution: 0.01 mm.
Piston Stroke: 250 mm.
Max Jaws Distance: Varies for tension and compression across models.
Deformation Measuring Accuracy: ≤±0.5%.
Overload Protection: ≥5% of full range.
Specimen Clamping Range: Varies for round and flat specimens.
Compression Plate and Bending Specifications: Vary by model.
Piston Moving Speed: ≥50 mm/min to ≥70 mm/min.
Power: Ranges from 3 kW to 10 kW.
Load Frame Weight: Ranges from approximately 2300 kg to 10000 kg.

Catalog excerpts

Computer Controlled Electronic-hydraulic Servo Testing Machine WAW-C Series-1

Beijing TIME High Technology Ltd. WAW-C Series COMPUTER CONTROLLED ELECTRO-HYDRAULIC SERVO TESTING MACHINE WAW- C Servo Hydraulic Tensile Testing Machine is mainly used for tensile test with high efficiency requirement. Equipped with relevant fixtures, this machine can also be used for compression, bending and shearing tests. Constant strain, Constant stress and constant displacement test are available. Strain velocity, stress velocity and displacement velocity conform to the requirement of GB, ASTM, DIN, ISO, JIS, BS etc. metal tensile testing standards. It is an ideal equipment for tensile test of metal rod, board, screw, steel strand (with special fixture) etc. material with high stiffness. Features ●Adopts load frame with oil cylinder at the bottom ●Oil cylinder piston adopts clearance sealing, longer usage ●Movement of Lower crosshead adopts plate motor,worm wheel and worm, drived by wrom ●Adopts imported oil pump ●Adopts imported servo valve, high accuracy for control ●TIME own controller and softw

Open the catalog to page 1

Computer Controlled Electronic-hydraulic Servo Testing Machine WAW-C Series-2

Beijing TIME High Technology Ltd. WAW-C Series COMPUTER CONTROLLED ELECTRO-HYDRAULIC SERVO TESTING MACHINE Technical Specification Item Load Measuring Range(kN) Test Load Indicating Accuracy Distance between two columns Displacement Accuracy Max. Jaws Distance (mm) tension (Including piston stroke) Max. Jaws Distance (mm) compression Deformation Measuring Accuracy Overload Protection Round Specimen Clamping Range (mm) Flat Specimen Clamping Range(mm) Compression plate Bending span(mm) Bending width and bending degree(mm) Piston moving speed(mm/min) Testing space adjustment Plate motor, worm and...

Open the catalog to page 2