Computer Controlled Electronic-hydraulic Servo Testing Machine WAW-A Series

Product catalog summary

Overview: The WAW-A Series by Beijing TIME High Technology Ltd. is a computer-controlled electro-hydraulic servo testing machine designed primarily for tensile testing with high efficiency. It can also perform compression, bending, and shearing tests, adhering to various international standards such as GB, ASTM, DIN, ISO, JIS, and BS.

Features:

Four-column load frame with an oil cylinder at the top.
Lower jaw seat fixed at the bottom; upper jaw connected to the crosshead via a screw column.
Motor-driven adjustment of testing space using worm and worm wheel transmission.
Hydraulic clamping mechanism.
Equipped with TIME's proprietary controller and software.

Technical Specifications:

Max Test Load: Ranges from 1000 kN to 5000 kN depending on the model.
Load Measuring Range: 2%-100% of max capacity.
Accuracy: Load indicating accuracy is ≤±1% of the indicating value; displacement accuracy is also ≤±1%.
Deformation Resolution: 0.01 mm.
Piston Stroke: Varies from 250 mm to 300 mm.
Max Jaws Distance: Tension ranges from 780 mm to 1000 mm; compression ranges from 650 mm to 1000 mm.
Deformation Measuring Accuracy: ≤±0.5% of indicating value.
Overload Protection: ≥5% of full range.
Specimen Clamping Range: Round specimens range from φ13-φ60 mm to φ22-φ56 mm; flat specimens range from 0-40 mm to 2-90 mm.
Compression Plate: 204x204 mm.
Bending Span: 300 mm to 1000 mm.
Piston Moving Speed: ≥50 mm/min.
Load Frame Dimensions and Weight: Varies significantly across models, with weights ranging from approximately 5000 kg to 26000 kg.

Catalog excerpts

Computer Controlled Electronic-hydraulic Servo Testing Machine WAW-A Series-1

Beijing TIME High Technology Ltd. WAW-A Series COMPUTER CONTROLLED ELECTRO-HYDRAULIC SERVO TESTING MACHINE WAW- A Servo Hydraulic Tensile Testing Machine is mainly used for tensile test with high efficiency requirement. Equipped with relevant fixtures, this machine can also be used for compression, bending and shearing tests. Constant strain, Constant stress and constant displacement test are available. Strain velocity, stress velocity and displacement velocity conform to the requirement of GB, ASTM, DIN, ISO, JIS, BS etc. metal tensile testing standards. It is an ideal equipment for tensile test of metal rod, board, screw, steel strand (with special fixture) etc. material with high stiffness. Features ●Adopts four columns load frame with oil cylinder at the top, tension space is locates at the low space, compression and bending are locates at the up space. ●Lower jaw seat fixed at the bottom. Upper jaw is connected with crosshead through screw column. ●Motor rotates by worm and worm wheel, transmission by screw nut screw column, to realize adjustment of testing space. ●Adopts hydraulic clamping way ●TIME own controller and softwar

Open the catalog to page 1

Computer Controlled Electronic-hydraulic Servo Testing Machine WAW-A Series-2

Beijing TIME High Technology Ltd. WAW-A Series COMPUTER CONTROLLED ELECTRO-HYDRAULIC SERVO TESTING MACHINE Technical Specification Item Load Measuring Range(kN) Test Load Indicating Accuracy Distance between two columns Displacement Accuracy Max. Jaws Distance (mm) tension (Including piston stroke) Max. Jaws Distance (mm) compression Deformation Measuring Accuracy Overload Protection Round Specimen Clamping Range (mm) Flat Specimen Clamping Range(mm) Compression plate Bending span(mm) Bending width and bending degree(mm) Piston moving speed(mm/min) Testing space adjustment Normal motor, worm...

Open the catalog to page 2