*mydirectindustry

Catalogs
BEIJING TIME VISION AI INSTRUMENT LTD.
Ac Yoke-Magnetic Particle Flaw Detector TCJE

Ac Yoke-Magnetic Particle Flaw Detector TCJE

Product catalog summary

Brief Introduction
Magnetic Particle Testing (MPT) is a non-destructive testing (NDT) method used to detect surface and near-surface flaws in ferromagnetic materials. The technique relies on the distortion of magnetic lines of force by flaws, which is revealed by the application of fine iron particles. The method is most effective for surface flaws, with effectiveness diminishing for deeper defects.

Standard Delivery

Power box: 1
Magnetic yoke (≥44N): 1
Power cord (30m): 1
Black magnetic powder (≥300 mesh): 50g
Light bulb (6.3V): 2
Fuse (5A): 2
Instruction manual: 1
TIME certificate: 1
Warranty card: 1

Features

Designed for detecting weld seams on the interior walls of large sphere tanks, steel parts, and fillet welds.
Lightweight with adjustable distance between magnetic poles.
Operates in AC field for surface detection and demagnetizing post-inspection.
Model TCJE-2 allows adjustment of probe direction.

Technical Specification

Model	TCJE-1	TCJE-2
Input power supply	220V/50Hz	220V/50Hz
Output voltage	36V	39V
Magnetizing current	3.5A	5A
Magnetization method	AC	AC
Probe	A	A
Lifting force	Model A≥49N(5kg), Model D≥117.6N(12kg), Model E≥117.6N(12kg)
Distance between magnetic poles	Model A: 20-160mm, Model D: 60-220mm, Model E: 100mm, Model O: interior diameter 185mm
Net weight	8.0kg	12.0kg

Catalog excerpts

Ac Yoke-Magnetic Particle Flaw Detector TCJE-1

ISO 9001 D1 AC YOKE-MAGNETIC PARTICLE FLAW DETECTOR TCJE Brief Introduction Standard Delivery Features Technical Specifi cation œ Magnetic Particle Testing (MPT) is a NDT method used to detect surface and near surface flaws in ferromagnetic materials. The technical principle is that magnetic lines of force (flux) are distorted by the presence of a flaw in a manner that will reveal it's presence. The flaw (for example, a crack) is located from the "flux leakage", following the application of fine iron particles, to the area under examination. For near surface defects, the effectiveness quickly diminishes depending on the flaw depth and type. The image is more sharp if the flaw is closer to the surface. œ Power box 1 œ Magnetic yoke (44N) 1 œ Power cord (30m) 1 œ Black magnetic powder (300 mesh) 50g œ Light bulb (6.3V) 2 œ Fuse (5A) 2 œ Instruction manual 1 œ TIME certificate 1 œ Warranty card 1 œ Applied for detecting weld seam of the interior wall of large sphere tank,steel parts and fillet weld œ Light weight and adjustable distance between magnetic poles œ Work in AC field for detection of surface and demagnetizing after inspection œ TCJE-2: adjustable the direction of the probe Model TCJE-1 TCJE-2 Input power supply 220V/50Hz 220V/50Hz Output voltage 36V 39V Magnetizing current 3.5A 5A Magnetization method AC AC Probe A A Lifting force Model A49N(5kg) Model D117.6N(12kg) Model E117.6N(12kg) Distance between magnetic poles Model A: 20-160mm Model D: 60-220mm Model E: 100mm Model O: interior diameter 185mm Net weight 8.0kg 12.0kg

Open the catalog to page 1

All BEIJING TIME VISION AI INSTRUMENT LTD. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list