Ultrasonic Flaw Detector
6Pages

{{requestButtons}}

Catalog excerpts

Ultrasonic Flaw Detector - 1

ULTRASONIC FLAW DETECTOR TUD210 Features: Real-time multi function system, stable, reliable and efficient operation The embedded software can be updated online Big memory of 400 A graph and 40000 thickness value Super Fast sampling capability, RF wave full display Wide & high bright EL display screen Alternative switch between single probe and double probe DAC automatically creation with standard test block Li battery, continue working time up to 6 hours USB and RS232 interface Adjustability of DAC curve is available for various requirements of DAC application High speed sampling, radio frequency display with 80 MHz for sampling Min. display range 2.5mm Technical Specification Test modes Spike excitation pulse Measuring range Sound speed Vertical linearity error Dynamic range Horizontal linearity error Display delay Sensitivity leavings Probe delay 0-110 dB variable in selectable steps of 0.2,0.5 ,1,2,6,12, and locked 50 ohms, 150 ohms, and 400 ohms Full wave, positive half wave, negative half wave and RF Linear, 0-80% of full screen, variable in steps of 1% Scanning Resolution Display screen Distance readout Provide single echo or echo to echo thickness reading or sound path, surface, and depth reading for angle beam testing with either peak or flank detection RS 232 and USB interface 9600 baud, 8 bits word length, no parity, 1 stop bit Printer driver TP UP-NH-S thermal printer Power supply Li batteries, continues working time approx. 6 hours Charging time Operating temperature Storage temperature Weight Probe connector

Open the catalog to page 1
Ultrasonic Flaw Detector - 2

Dataview for TIME ultrasonic flaw detector TUD210 Standard Delivery » Neck strap » Straight probe i Cable with LEMO connector » Protection case » Warranty card Optional Accessory i Various probes (see page 35) » Connecting cable

Open the catalog to page 2
Ultrasonic Flaw Detector - 3

ULTRASONIC FLAW DETECTOR TUD300 Features: Measuring of pitch interval and analyze of echo times Auto-calibration of probe and auto-gain Two measuring unit: mm/inch All built-in software can be up-graded on PC Lock/unlock the system parameters Equipped with gate setting and alarming function Two measurement displaying mode: A-scan and B-scan Freeze/defreeze waveform and detection parameters Communicating with PC by RS232 port for transferring the measuring data and system parameters 10 detecting channels are available with separated detecting param eters and DAC curve in every channel...

Open the catalog to page 3
Ultrasonic Flaw Detector - 4

ULTRASONIC FLAW DETECTOR TUD310 Features: Two measuring unit: mm/inch Four Rectify Ways: positive half-wave, negative half-wave, full wave and radio frequency Two scanning mode: A and B Gate alarming function 32 detecting channels are available with separated detecting parameters and DAC curve in every channel Automatic generation of DAC curve, and 30 points can be recorded at most, adjustable offset curves and gain correction functions are available Three detecting modes: single-probe , dual-probe and transmission Equipped with high-speed USB port and flash memory device can be used...

Open the catalog to page 4
Ultrasonic Flaw Detector - 5

ULTRASONIC FLAW DETECTOR TUD320 Features: Color TFT display screen with backlight Reference waves with different colors can be displayed at the same time Curved surface correction: inspection of inner and outer curved surface, auto-correcting the detecting result according to diameter of curved surface DGS (AVG) curve: special key is designed for 2 types of DGS curves: flatbottom hole and infinite plane Real-time battery power indication, displayed by percentage Displaying echo times during multi-times echo detecting in which users are required to input the thickness value of work piece...

Open the catalog to page 5
Ultrasonic Flaw Detector - 6

ULTRASONIC FLAW DETECTOR TUD300/310/320 Dataview for TIME ultrasonic flaw detector TUD300/310/320 Editing and management of saved data and echoes Edit and print of examination report as users’ demand Dataview for TUD310 and TUD320 is equipped with real-time display of detecting waves on the computer screen Copy screen and DGS(AVG) management functions are supplied for TUD320 dataview Scroll and review data for examination Edit and print of Examination Report TIME ultrasonic probes TIME supplies various kinds of ultrasonic probes as customer’s requirements

Open the catalog to page 6

All BEIJING TIME VISION AI INSTRUMENT LTD. catalogs and technical brochures

  1. TIME5300

    1 Pages

  2. TIME 2020

    76 Pages

Archived catalogs

  1. TH1101

    2 Pages