XQ13 100A HIGH PERFORMANCE AC MICRO AMP CLAMP ON CURRENT PROBE

Product catalog summary

Overview: The XQ13 is a high-performance handheld clamp-on current transducer designed for online measurement of cables ranging from 10A to 100A. It is suitable for various applications including electric energy meter calibration, ground resistance testing, and power quality analysis.

Applications:

Electric energy meter calibrator (on-site)
Double clamp type ground resistance tester
Double clamp type phase volt-ampere meter
Digital multi-meter
Multi-function energy meter
Oscilloscope
Power quality analyzer
Matched instruments
Calibration instrument on-site

Features:

Measurement range from 1mA to 100A AC
Compact and ergonomic design for easy operation
Low phase shift for accurate power measurement
Load capacity of ≤4Ω
Lead output model with a 2.5m cable

Electrical Parameters:

Ratio: 1000:1 or 2000:1 (customizable)
Accuracy class: 0.1%, 0.2%
Primary current: 0 - 100A AC
Secondary current: 0 - 100mA AC (customizable)
Max continuous input current: 120A
Over voltage category: CAT III 600V
Output signal (AC current): 0 to 100mA AC at nominal input
Output signal (AC voltage): 0 to 2V AC at nominal input
Frequency range: 40Hz-2000Hz
Dielectric strength: 3KV at 50Hz/60Hz for 1 minute
Temperature range: -20°C to +55°C
Max voltage for non-insulated conductors: 600V

Standards and Installation:

Complies with EN 61010-1, EN 61010-2-032, IEC60044-1
Clamp type installation

Mechanical Parameters:

Dimensions: 48 x 179 x 27 mm
Weight: 280g
Holding wire diameter: φ13 mm
Max jaw opening: 13 mm
Jaw colors: Red, yellow, blue, green, black
Material: PC+ABS+Polycarbonate, UL94 V0

Catalog excerpts

XQ13 100A HIGH PERFORMANCE AC MICRO AMP CLAMP ON CURRENT PROBE-1

High Performance Handheld Clamp On Current Transducer The model XQ13 handheld clamp on current transducer is suitable for 10A-100A cable online measurement, it belongs to high performance transducer ﬁeld. Electric energy meter calibrator (on site) Double clamp type ground resistance tester Double clamp type phase volt-ampere meter Digital multi-meter Multi-function energy meter Oscilloscope Power quality analyzer Matched instruments Calibration instrument on site Measurement range of 1mA to 100A AC Small, compact size Improved ergonomic design and easy operation Low phase shift for power measurement With load capacity ≤4Ω Output model: Lead output(2.5m) Current Probe | EDITION : 14-02 | Page 1 of 2 Subject to change without noti

Open the catalog to page 1