FU8000 SINGLE PHASE AC DC DIGITAL CURRENT AND VOLTAGE DISPLAY METER

Product catalog summary

Overview: The FU8000 series is a single-phase current and voltage display meter designed to replace traditional digital meters. It offers enhanced functionality with programmable features, DC4-20mA analog output, RS-485 communication interface, and switching power output.

Features:

Programmable functions for PT, CT ratio, address, baud rate, and other parameters.
High accuracy with 0.5 class for general measurements and 0.2 class for frequency.
Excellent electromagnetic compatibility (EMC) and aesthetic design.
RS-485 communication interface for data output using Modbus-RTU protocol.

Specifications:

Display: 4 bits (4½ bits for DC).
Current measurement: 1A, 5A; Voltage measurement: 100V, 220V, 380V.
Temperature measurement: PT100, J, K, T, E thermocouples.
Frequency: 50Hz / 60Hz ±10%.
Power supply: AC220V ± 20% or DC100-300V (customizable).
Power consumption: Less than 3VA.
Insulation strength: 2KV/min, 2mA; Insulation resistance: ≥100MΩ.
MTBF: ≥50000 hours.
Operating temperature: -25 to +55°C; Humidity: ≤98% RH without condensation.

Model Variants:

Dimension codes: 48x48x100mm, 120x120x81mm, 96x96x98mm, 96x48x112mm.
Product codes for different measurement types: Single phase AC current, AC voltage, DC current, DC voltage, frequency, power factor, temperature, and all electric parameters.
Function codes for display and communication options: Display only, RS485, digital output (DO), analog output (AO), combinations of DO, AO, and RS485.
Display options: LED or LCD.

Additional Features:

Switching input for remote signal input with self power supply (AC or DC 220V).
Switching output with normally open contact output (AC 250V / DC 30V, 5A).

Catalog excerpts

FU8000 SINGLE PHASE AC DC DIGITAL CURRENT AND VOLTAGE DISPLAY METER-1

GFUVE FU8000 DIGITAL METER FU8000 Single Phase Current And Voltage Display Meter FU8000 series single phase current and voltage display meter has replaced the traditional digital meter products. This product has the function of traditional products, also has programmable functions, such as DC4-20mA analog output, RS-485 communication interface port and the switching power output function. It has high accuracy, excellent EMC and good appearance and so on. Features 1. It has programmable function 3. High accuracy, excellent EMC and good appearance 4. RS-485 communication interface port ParametersName Measurement type Programmable Digital Meter | EDITION : 14-02 | Page 1 of 2 Subject to change without notice

Open the catalog to page 1