DC-2000
DC-2000
The provided document contains minimal technical information, specifically the notation "T-E0.65~" and a measurement of "400mm."
Summary of Content:
- Specification: The term "T-E0.65~" likely refers to a technical parameter or code, possibly indicating a tolerance, coefficient, or a specific model/type designation.
- Dimension: The value "400mm" indicates a length or size measurement, which could relate to a component dimension or spacing.
Limitations: Due to the extremely limited data, no further analysis, procedures, standards, or recommendations can be derived.
Catalog excerpts
Ultrasonic Thickness Gauge DC-2000C/2020C Auto calibration Auto probe identification 0.65~ 400mm T-E Large measuring range Features: • Measuring range: 0.65-400mm • Standard delivery D5008:0.8-300mm • 7.5MHz, 2.0MHz,10MHz probe available • 0.01 mm/0.001 inch • Accuracy: ± (0.04mm thickness < 9.99mm) ± (0.1% thickness + 0.04mm, thickness between 10 and 99.9mm) ± (0.3% thickness, thickness > 100mm) • Memory of 5000 data, USB output
Open the catalog to page 1All Beijing Dragon Electronics Co catalogs and technical brochures
DHT-300Plus/310Plus1 Page
DHT-4001 Page
DC-40002 Pages
DC-3000/30201 Page
English Pamphlet 201632 Pages
Ultrasonic Thickness Gauge9 Pages
Ultrasonic Flaw Detector4 Pages
- Indentation hardness tester
- Digital display hardness tester
- Portable thickness gauge
- Portable hardness tester
- Coating thickness gauge
- Digital display thickness gauge
- Flaw detector
- Ultrasonic thickness gauge
- Mobile flaw detector
- Portable flaw detector
- Roughness tester
- Ultrasonic flaw detector
- Leeb hardness tester
- Digital flaw detector
- Wall thickness gauge
- Portable roughness tester
- Surface roughness tester
- Pipe thickness gauge
- Manual calibration thickness gauge