DESCRIPTION V7-06 series ball valve actuator is using bi-directional motor. Matching with V7-02 series flange ball valve body, it is mainly used in central air-conditioning system, heating system, water treatment, and production industry to control the flow of chilled/hot medium. • Easy & flexible installation • Position feedback auxiliary switch for option • High strength die-casting aluminum alloy chassis, fireproof ABS engineering plastic, measure up UL94V-0 standard • Built-in limiter for power saving and longer motor life • Suitable for DN125-DN200 flanged ball valve • 0(2)~1 0V DC or 0(4)~20mA control input signal, proportional control, and 0~10V DC feedback signal. Product code - Control Signal - Blank: Floating M: modulating control, 0~10V feedback (Only for 24Vac) Valve Type - Valve Size - Breeze Building Technologies V7 Series Floating/Modulating Ball Valve CE II EN60730-1

MANUAL LEVER • Cut off power supply when repairing or maintaining. • Do not connect or disconnect wire when power is on. • Please install the actuator cover properly when the actuator is working. 1. Calibration mode: After power is on, set JP1 switch “4” to position “ON” as request (refer to the below JP1 switch setting diagram) , then press SW1 calibration/reset button, power LED is flashing during calibration, and the actuator stem is rotating till to the end (has reached the end position of ball valves). Afterward the stem will rotate back to initial position. Power LED will stop flashing...