Parameter Settings: Switch off the thermostat and Dress “.©” and “■*■”5 seconds to enter parameter setting menu, press the or“©” to change the item, and press"“'‘■’’to change the value, press power button “O” or wait 30S to exit and save all settings. To set/change the program comfort levels follow these steps. Power on thermostat, press “OK” and “.©” for 3 seconds. 2, Press “’"'“and to set start hour. 3, Press “.©” and use “ ” and to set start minute. 4, Press “.©” and use “ ” “■*■” to set desired temperature. 5, Press “.©” to enter event 2/3/4 and repeat step 2~4. 6, Press “.©” to edit “Sat & Sun” and repeat step 1~5.

Wiring Diagram The device is considered electronic equipment for disposal in terms of the applicable local Directive and may not be disposed of as domestic garbage. --Device disposal through channels provided for this purpose. --Comply with all local & currently applicable laws & regulations Mounting and Installation Mount the room thermostat on the conduit box. Do not mount on a wall in niches or bookshelves, behind curtains, above or near heat sources. Mount about 1.5 m above the floor Devices must be mounted on clean, dry indoor place without direct airflow from a heating / cooling device,...