High Efficiency Particle Arrestor technology (HEPA) Automatic flow control Features and advantagesImported motor Using imported motor, stable operation, can run continuously for more than 45,000 hours The entire machine is designed with quietness and noise reduction, with low noise, and is a patented product. The liquid crystal display shows the machine's operating status, allowing real-time understanding of the system temperature, filter blockage degree, and audio-visual alarm when the filter is locked. The control system is equipped with an IO port, which facilitates the connection with automated equipment, enabling remote operation and monitoring of the device's operation. Intelligent control of motor speed, automatically adjusting fan speed based on filter resistance and the number of smoking arms opened.

• Size (Depth*Width*Height) Features and advantages • Designed for the welding and cutting industry. • High purification efficiency. • Strong dust collection capabilities. • Automatic pulse cleaning. • Fire prevention. • Intelligent control system. • Customizable based on dust characteristics. • Automatic filter cleaning. • Enhanced dust absorption and purification. • Easy to operate and safe. • Whole machine power supply comes with ground fault circuit interrupter, phase sequence protection, and phase loss protection for user safety.) • Fan operation and pulse cleaning are controlled by 24V...

Control Panel 1. Filter Cartridge Differential Pressure Indicator 2. Power Indicator Light 3. Temperature Display Device 4. Dust Cleaning Indicator Light 5. Operation Indicator Light 9. Power Main Switch 6. Operation Button 7. Dust Cleaning Button Operating Instructions 8. Dust Cleaning Selection Switch 1、Turning On/Off the Machine： After the equipment is connected to the power supply, turn the power main switch from OFF to ON. At this point, the power indicator light will illuminate. Press the machine's operation button to start the machine, and the operation indicator light will light up. To...

When the manual dust cleaning mode is selected, turn the dust cleaning selection switch to the manual position. The operation logic is as follows: 1）During equipment operation, observe the differential pressure gauge manually. When the pressure differential reaches a certain value (this value can be chosen as needed, and it is recommended to be around 1200 Pa), it is suggested to perform dust cleaning. Press the dust cleaning button for 1–2 seconds. At this point, the dust cleaning indicator light will turn on, and the pulse valve will activate. Within 50 seconds, there will be 10 reverse blow...

3. Air Supply Connection The air supply should be instrument air with a pressure of 0.6–0.8 MPa. Ensure that the air supply is clean and free from water, oil, and impurities. When connecting the air supply, ensure tight and reliable connections to prevent any air leakage. The diameter of the air hose is 12 mm. Filtration system The filtration system uses a front-inlet structure with a large slanted surface and filter cartridges. The slanted surface collects large, hot particles into the ashtray while the heat-resistant filter material improves safety. The system's top-inlet design allows dusty...

3、High-Efficiency Filter Replacement Conditions After the equipment is put into operation, the high-efficiency filter cartridge should be inspected every 3 months to ensure that it is not damaged and that it is properly sealed with the machine housing. Depending on the actual conditions, the longer the equipment runs, the shorter the interval between inspections should be, and the more frequent the inspections should become. 1) If the high-efficiency filter cartridge is found to be damaged or not properly sealed with the machine housing, it should be replaced promptly. 2) Depending on the amount...

Long service life High efficiency Scientific Design Cartridge filter Main Filter Features and advantages Cartridge filter Cartridge filter is made of heat-resistant material, which effectively improves the safety factor within the purification equipment. Additionally, the system's overall structure adopts a top air inlet method, where the dust-laden gas makes a 90-degree turn before reaching the filter elements, avoiding direct impact on them and thereby extending the service life of the filter cartridges. Main Filter The main filter consists of a HEPA high-efficiency filter and a chemical filter....

Cartridge filter Specification 9 324*400 99.15 % • External Dimensions (Diameter X Height) • Filtration Efficiency • Filtration Accuracy • Filter Cartridge Material: The filter cartridge is made of heat-resistant material, which effectively enhances the safety factor of the purification equipment. • Filtration Efficiency: The filter cartridge can achieve a smoke and dust filtration efficiency of up to 99.15% at 0.3 micrometers, indicating that it can capture particulate matter as small as 0.3 micrometers, offering excellent filtration performance. • Automatic Pulse Jet Cleaning System: The filter...

Main Filter^ Specification • Filtration Efficiency 99.997 % • Polluted airflows that are slow and turbulent take a 90-degree turn before entering the main filter cartridge. This causes larger particles to be ejected from the airflow due to inertia, reducing the likelihood of clogging the main filter and extending its service life. • Balanced Flow Distribution Plate: This plate ensures that the airflow is evenly distributed through the filter cartridge, ensuring that every part of the cartridge is effectively utilized. This also extends the service life of the filter cartridge. • HEPA High-Efficiency...

Application Industries The APT fume extraction system has been widely applied in numerous industries, including food and beverage, pharmaceuticals, automotive (both whole vehicles and components), intelligent manufacturing, electronics and electrical assembly, and photovoltaic power generation. Over the past 20 years, we have provided fume extraction services to more than 1,000 customers, including Fortune Global 500 companies, research institutions, and military enterprises. We have established solid strategic cooperative relationships with our customers and have maintained our products' leading...