Features and advantages Imported motor Using imported motor, stable operation, can run continuously for more than 45,000 hours Quiet design The entire machine is designed with quietness and noise reduction, with low noise, and is a patented product. Liquid crystal display The liquid crystal display shows the machine's operating status, allowing real-time understanding of the system temperature, filter blockage degree, and audio-visual alarm when the filter is locked. IO port The control system is equipped with an IO port, which facilitates the connection with automated equipment, enabling remote...

Fume extractor^ Specification LE8430i LE81000i Max Motor Pressure Max Flowrate Wattage Voltage Sound rating 220 V / on order 220 V / on order 220 V / on order • The body is small in size, low in running noise, and equipped with casters for easy movement;; • The control system has a filter element blockage alarm function, prompting to replace the filter element in time; • Configure wireless remote control to facilitate remote operation of the machine. The remote linkage start-stop interface can also be configured; • Multi-stage large-capacity filter to ensure efficient purification of smoke, odor...

^ Control Panel 2. Run/Alarm Indicator Light 3. Speed Control Knob 1. Button Switch: Press the button switch to turn it on, and the green indicator light of the switch will light up; the machine will start and begin to operate. 2. Run/Alarm Indicator Light: This light indicates the operating status of the equipment, 75% saturation, and blockage status. 3. Speed Control Knob: Press the “+” or “-” buttons to adjust the airflow. Note: The optimal setting is when the smoke is effectively drawn in. It is recommended to use the lowest possible vacuum level to extend the lifespan of the filter cartridge....

HP255-L Specification Size (Depth*Width*Height) 500x480x1240 mm Features and advantages • Designed specifically for fixing workpieces during flexible PCB cutting while purifying smoke generated by laser cutting. • It features strong suction, high filtration efficiency, adjustable flow rate, and low noise levels. • One machine can perform both fixation and purification functions. • The system uses high-pressure, high-flow branded fans to effectively fix workpieces and absorb smoke particles, prolonging the lifespan of filter cores. • The filtration system consists of pre-filters and main filters....

^ Control Panel Operating Instructions 1. Wiring should be carried out according to the electrical requirements specified on the machine’s nameplate, and the correctness of the power supply wiring must be confirmed before power is applied (this task should be performed by a qualified professional); 2. After the power supply is connected, the digital display screen of the controller will light up; • a) Press the RUN button to start the machine • b) External control start 4. Rotate the knob clockwise to increase the airflow of the equipment. Rotate it counterclockwise to decrease the airflow. When...

^ Installation Instructions 1. Wiring of the Equipment: Wiring should be completed by a qualified electrician in accordance with the specifications on the equipment nameplate. 2. Selection of Ductwork: Choose appropriate ducts based on the usage requirements. The ducts should have a smooth inner surface, reinforced with metal supports inside, and be capable of withstanding a certain level of negative pressure. 3. Connection of Ductwork: When connecting the ducts to the equipment, use mechanical connections such as hose clamps. Apply sealant at the connection points to ensure the connections are...

• Size (Depth*Width*Height) Features and advantages • Designed for the welding and cutting industry. • High purification efficiency. • Strong dust collection capabilities. • Automatic pulse cleaning. • Fire prevention. • Intelligent control system. • Customizable based on dust characteristics. • Automatic filter cleaning. • Enhanced dust absorption and purification. • Easy to operate and safe. • Whole machine power supply comes with ground fault circuit interrupter, phase sequence protection, and phase loss protection for user safety.) • Fan operation and pulse cleaning are controlled by 24V...

Control Panel 1. Filter Cartridge Differential Pressure Indicator 2. Power Indicator Light 3. Temperature Display Device 4. Dust Cleaning Indicator Light 5. Operation Indicator Light 9. Power Main Switch 6. Operation Button 7. Dust Cleaning Button Operating Instructions 8. Dust Cleaning Selection Switch 1、Turning On/Off the Machine： After the equipment is connected to the power supply, turn the power main switch from OFF to ON. At this point, the power indicator light will illuminate. Press the machine's operation button to start the machine, and the operation indicator light will light up. To...

When the manual dust cleaning mode is selected, turn the dust cleaning selection switch to the manual position. The operation logic is as follows: 1）During equipment operation, observe the differential pressure gauge manually. When the pressure differential reaches a certain value (this value can be chosen as needed, and it is recommended to be around 1200 Pa), it is suggested to perform dust cleaning. Press the dust cleaning button for 1–2 seconds. At this point, the dust cleaning indicator light will turn on, and the pulse valve will activate. Within 50 seconds, there will be 10 reverse blow...

3. Air Supply Connection The air supply should be instrument air with a pressure of 0.6–0.8 MPa. Ensure that the air supply is clean and free from water, oil, and impurities. When connecting the air supply, ensure tight and reliable connections to prevent any air leakage. The diameter of the air hose is 12 mm. Filtration system The filtration system uses a front-inlet structure with a large slanted surface and filter cartridges. The slanted surface collects large, hot particles into the ashtray while the heat-resistant filter material improves safety. The system's top-inlet design allows dusty...