Catalogs >
Beijer Electronics >
JetCon 2401 - data sheet

JetCon 2401 - data sheet
3Pages

Catalog excerpts

| JetCon 2401 / 2401-wIndustrial Serial to Fiber Media Converter C€ rs X RoHS ■ 3-in-1 RS232/422/485 to serial fiber media converter ■ Easy mode change without resetting ■ Supports Multi-mode 5KM, Single-mode 40KM ■ PTP or SFR transmission mode for serial fiber ring communication ■ Auto baud rate and direction control ■ High level immunity with 15KV ESD protection ■ Two-way 120 ohm line terminator ■ Supports biasing resistor ■ Dual modes for power input, AC 24V(12~32V)/ DC 24V(12~48V) ■ -20~70oC operating temperature for hazardous environment applications (-40~70oC wide operating temperature available by request) | Overview JetCon 2401 is a 1-port RS232/422/485 serial to fiber media converter with extended fiber transmission. Single-mode and Multi-mode fiber optic ports meet your needs for long distance transmission up to 40KM. JetCon 2401 will automatically detect the data baud rate of the connected full-duplex serial device, ranging from 300 to 921,600bps. By moving up the DIP switch, JetCon 2401 supports an auto setting function without system power reset to change serial interface, fiber wiring architecture and termination of receiver and transmission line. Also JetCon 2401 is specially designed for applications requiring good immunity of EMI/EMS such as power substation, rail and traffic control signification systems under severe electromagnetic interference and wide temperature range. JetCon 2401 can be easily wall mounted as well as be mounted directly on DIN rail. AC 24V(12~32V) or DC 24V(12~48V) is available for different operating environments. With IP 30 rigid aluminum case, CE/FCC regulatory approvals, and 5-year global warranty, JetCon 2401 is your reliable choice for hazardous applications. A Beijer Electronics Group Company

Open the catalog to page 1

◄ Industrial Media Converter The JetCon 2401 supports two transmission TX). To expand the number of connected serial devices configurations, Peer to Peer in full duplex and Serial users can apply the SFP configuration mode and Fiber Ring (SFR) in half duplex. In a Peer-to-Peer configuration, two fibers are required between the two converters, one for data in each direction (RX and Peer to Peer Serial Communication (PTP) connect the fiber transmitter to the rest of the slaves and eventually back to the master node. Serial Fiber Ring Communication (SFR) Industrial Intelligent NMS |...

Open the catalog to page 2

| Specification Technology Standard: EIA/TIA-232 RS-232 (ITU-T v.28) EIA/TIA-422 RS-422 (ITU-T v.11) EIA/TIA-485 RS-485 (ISO/IEC8284) Serial Interface: RS-232 2-wires, RS-422 4-wires, RS-485 2/4-wires Architecture: PTP mode: Peer To Peer wiring with full or half duplex mode. SFR mode: Serial Fiber Ring with half duplex mode Interface Number of Ports: 1 x RS-232/RS-485/RS-422 serial port 1 x Fiber Transmit port, 1 x Fiber receive port Connectors: Serial port: 7-pin removable terminal block Fiber port: 1 x Duplex ST Power input: 3-pin removable terminal block with earth ground Transmit Baud...

Open the catalog to page 3