Intralogistics / Material Handling
16Pages

weldable elastic monolithic conveyor belts and belt profiles for intralogistics

CONTENT 03 Introduction 04 „Material Handling": Applications, product requirements and solutions 06 Product groups of BEHAbelt 07 Features of monolithic conveyor belts 08 Features of belt profiles 09 Product information of monolithic conveyor belts 10 Product information of belt profiles 12 Welding technology 13 Technical information 15 Service 16 Get your samples

smart conveying: logistics – an industry in motion The range of different application types in intralogistics is very extensive. In order that the individual processes can be coordinated in the best possible way, BEHAbelt offers versatile solutions for the requirements of material handling. Our product solutions reach from classic round and V-belts to elastic monolithic conveyor belts. The suitable welding technology allows you to minimize downtimes quickly and cost-savingly, even on site. ADVANTAGES ONE-STOP SHOP As a manufacturer of these products, we are able to individually manufacture...

OOP Crossed drive / Central drive shaft TYPICAL APPLICATIONS WITH BELT PROFILES Application ROLLER CONVEYORS In the logistics industry, roller conveyors have a prevalent position; they can be found in almost every process area. This includes our BEHAbelt tangential belt Bluepower as well as our special low stretch material compound PUplus, which are designed for dimensional stability and high load and torque absorption. For roller-to-roller drives we also offer round belts as well as a unique Poly-V solution, which can also be joined quickly and easily on site to keep downtime to a minimum....

QDDD Crossed drive / Central drive shaft TYPICAL APPLICATIONS WITH BELTS Application CONVEYOR LINES Even basic conveying functions require numerous different belt properties, for different materials to be conveyed, conveying speeds, deflection cards, stop & go and accumulation operation as well as other operating conditions BEHAbelt supplies optimally designed product solutions. INCLINED CONVEYOR Conveyed goods can be transported at an angle even with smooth belt surfaces. The conveying angles that can be realized here depend on the nature of the material to be conveyed, the coating on the...

Overview product portfolio ELASTIC MONOLITHIC CONVEYOR BELTS ROUND BELTS TWISTED ROUND BELTS HOLLOW ROUND BELTS BELT GUIDE: V-GUIDES V-RIBBED BELT POLY-V BELT GUIDE: BELT EDGES WELDING TECHNOLOGY

BELT CONSTRUCTION AND CHARACTERISTICS Monolithic conveyor belts are extruded homogeneously and do not consist of several layers that are connected to each other. Layer separation or the detachment of coating particles are therefore impossible. Materials and designs are selected to cover a wide range of characteristics, such as wear and chemical resistance. Special features like antistatic dissipation, UV resistance, cold flexibility or hydrolysis resistance can be added by using additives in the manufacturing process. Belt constructions of BEHAbelt can be manufactured in one or two layers...

Weldable belt profiles BELT MATERIALS AND CHARACTERISTICS For the manufacturing of belt profiles BEHAbelt works with high quality PU and TPE materials which guarantee an optimal performance and a long service life in conveyor technology and drive applications. On the one hand they are resistant to oil, grease or chemical agents and on the other hand they are resistant to hydrolysis. is a special material composition for elevated load capacity and reduced elongation with the same product design and unchanged pulley diameters, compared to products made of standard PU compounds. As standard,...

MORE BELTS IN OUR PRODUCT PORTFOLIO Conveyor belts for logistics BOTTOM SIDE: FABRIC IMPRESSION (FI), WIDTH 750 mm ® CDDD Please consider a coefficient of friction of p = 0.15 for a roller conveyor support. NOTECHED V-GUIDES / GUIDE PROFILES BELT EDGES FOR CURVED CONVEYORSGUIDE PROFILE ROUND/SMOOTH 0 5 x 9 mm Belt edges for stabilising and guidance of curved belts. Belt edges are usually applied by sewing and/or gluing. Weldable V-guides are often used as guide profiles on the running side in order to support the straight running of e.g. short or under-square conveyor belts or to absorb...

PU85A plus [PJ2 PJ3 PJ4 ] \j\J uv/vV Vjwvaj Recommended pretension: 3...6 % Coefficient of friction p: Steel: 0,70; PE: 0,40; HDPE: 0,35 Recommended pretension: 3...6 % Coefficient of friction p: Steel: 0,60; PE: 0,30; HDPE: 0,25 also available with polyester reinforcement Recommended pretension: 2...4 % Coefficient of friction p: Steel: 0,35; PE: 0,20; HDPE: 0,15 also available with polyester reinforcement Recommended pretension: 2...4 % Coefficient of friction p: Steel: 0,35; PE: 0,20; HDPE: 0,15 TWISTED ROUND BELTS plus smooth (matt) available standard lengths of 250 - 710 mm Recommended...

ROUND BELTS Recommended pretension: 4...8 % Coefficient of friction p: Steel: 0,70; PE: 0,40; HDPE: 0,35 MORE BELT PROFILES IN OUR PRODUCT PORTFOLIO Recommended pretension: 3...6 % Coefficient of friction p: Steel: 0,70; PE: 0,40; HDPE: 0,35 Recommended pretension: 4...8 % Coefficient of friction p: Steel: 0,65; PE: 0,35; HDPE: 0,30 Recommended pretension: 4...8 % Coefficient of friction p: Steel: 0,45; PE: 0,30; HDPE: 0,25 HOLLOW ROUND BELTS Recommended pretension: 3...6 % Coefficient of friction p: Steel: 0,45; PE: 0,30; HDPE: 0,25 Recommended pretension: 4...8 % Coefficient of friction...

Welding tools FOR BELTS UP TO A WIDTH OF 800 mm BEHAbelt has developed the welding tools HS400 and HS800 especially for butt welding of conveyor belts. HS400 for up to 400 mm belt width HS800 for up to 800 mm belt width S ophisticated design with positioning aids and stoppers ensures highly repeatable accuracy of weldings C lamping lever with locking device Exact temperature adjustment via control unit N o adhesion of PU or TPE material due to Teflon-coated heating paddle FOR BELT PROFILES AND FLAT BELT STRIPS UP TO A WIDTH OF 80 mm The welding paddles BEHAbelt EErgo 60 and 90 have been...