Slip-free monolithic AT5 conveyor belts SLIP-FREE. ACCURATE. HYGIENIC.

SLIP-FREE CONVEYOR BELTS Smallest pulley diameters with positive drive For high hygienic requirements The positive-driven AT5 conveyor belts from BEHAbelt enable slip-free traction, even with the smallest pulley diameters of only Ø 18 mm. This means that even conveyor sections with the smallest transfers can now be utilized with a slip-free belt solution. In combination with a maximum belt width of up to 700 mm, the new product series from BEHAbelt represents a new product solution which once again shifts the previous limits of the possible applications of positive-driven belt solutions on the...

APPLICATIONS & BENEFITS Guiding concepts for belts Because of the flexibility of the slip-free belts, very small pulleys can be designed at the drive and idler pulley, which, in addition to cost savings or conversion of the motor and drive concepts, may also require less installation space and allow better accessibility to the system parts. Design standards simplify belt configuration The slip-free belts from BEHAbelt allow a process-safe application, thanks to a standardised pretension recommendation for all belt widths and belt designs. The low pretension of only 2 % enables easy installation...

APPLICATIONS Suitable application areas Due to the elastic monolithic belt construction, the use of the belts is essentially recommended for small and medium weights. Wherever precise timing, positioning and reversing is required, this belt solution is an great alternative and product solution. Replacement of T5 timing belts with aramid and steel reinforcement Thanks to the belt width of up to 700 mm, multiple belt strands designs can be replaced by one belt, which represents hygienic improvement and simplifies the design of the systems. Particularly for light and medium loads, timing belt solutions...