BEFARD XC ASSEMBLY ROBOTS

XC ASSEMBLY ROBOTS BEFARD XC series assembly robots are irreplaceable units during installation and transportation of windows, panes and other flat surfaces. Depending on configuration, they may have the range above 5 meters and lifting capacity up to 800 kg. Battery-powered, electric & hydraulic BEFARD robots work excellently both outdoors, e.g. on yards in front of the buildings, and inside the buildings. BEFARD XC robots, regardless of the variant, ensure the possibility of lateral sliding of the frame with suction cups by 100 mm, such solution allows operation of the lateral slide hydraulic...

XC 400 BEFARD XC 400 One hydraulic extension arm Adding two hydraulic functions increases the unit’s range by 15 cm, thus giving the total range of 3.7 m. The diagram presents lifting capacity for the basic variant of the unit excluding any additional hydraulic functions (rotation and tilting). Number of suction cups: 4 Designed and manufactured entirely in Poland

XC 600 BEFARD XC 600 One hydraulic extension arm Adding two hydraulic functions increases the unit’s range by 15 cm, thus giving the total range of 3.7 m. The diagram presents lifting capacity for the basic variant of the unit excluding any additional hydraulic functions (rotation and tilting). Number of suction cups: 6 Designed and manufactured entirely in Poland

XC 600 BEFARD XC 600 One hydraulic extension arm Adding one or two hydraulic functions increases the unit’s range by 15 cm, thus giving the total range of 4.4 m, and changes its lifting capacity. The diagram presents lifting capacity for the basic variant of the unit excluding any additional hydraulic functions (rotation and tilting). Number of suction cups: 6 Designed and manufactured entirely in Poland

XC 800 BEFARD XC 800 One hydraulic extension arm Adding one or two hydraulic functions increases the unit’s range by 15 cm, thus giving the total range of 3.7 m, and changes its lifting capacity. The diagram presents lifting capacity for the basic variant of the unit excluding any additional hydraulic functions (rotation and tilting). Number of suction cups: 8 Designed and manufactured entirely in Poland

XC 800 BEFARD XC 800 Two hydraulic extension arms Adding one or two hydraulic functions increases the unit’s range by 15 cm, thus giving the total range of 4.4 m, and changes its lifting capacity. The diagram presents lifting capacity for the basic variant of the unit excluding any additional hydraulic functions (rotation and tilting). Number of suction cups: 8 Designed and manufactured entirely in Poland

XC 800 BEFARD XC 800 Three hydraulic extension arms Adding one or two hydraulic functions increases the unit’s range by 15 cm, thus giving the total range of 5.1 m, and changes its lifting capacity. The diagram presents lifting capacity for the basic variant of the unit excluding any additional hydraulic functions (rotation and tilting) 200 kg Number of suction cups: 8 Designed and manufactured entirely in Poland

DIMENSIONS OF BEFARD XC400 / XC600 / XC800 ROBOTS

Maximum spacing of suction cups Frame spacing

TRANSPORTATION DIMENSIONS Variant I (suction cup frame – vertical; steering wheel – folded to the side) Variant II (suction cup frame – horizontal; steering wheel – straight)

XC START-UP RANGE FOR LIFTING FROM THE GROUND Variant I (1 hydraulic extension arm) Variant II (2 hydraulic extension arms)