TEMPERATURE SWITCHES AND SENSORS BIMETAL TEMPERATURE SWITCHES ELECTRONIC TEMPERATURE SWITCHES ELECTRONIC TEMPERATURE SENSORS SCREW-IN RESISTORS Certified Quality Management System Certified Environmental Management System

Bimetal temperature switches with reset hysteresis < 15 K 6 Order number overview 8 Bimetal temperature switches with reset hysteresis < 25 K 10 Order number overview 12 Electronic temperature switches 18 Order number overview 20 Electronic temperature sensors 22 Order number overview 24 Characteristics of sensor elements 31 Order number overview 32

BEDIA The company Measuring with system and passion As a high performance and innovative company BEDIA deve- Since 1986 BEDIA Motorentechnik is a valued partner of nu- lopes, produces and distributes well thought out solutions for merous manufacturers of agricultural and construction ma- level and temperature monitoring. chinery, compressors, engines, power train control systems and We have been concentrating our skills in the domain of meas- utility vehicles. uring filling levels and temperatures under extreme operating The high quality requirements of our world wide operating cus- conditions....

currently about 150 employees Foundation of BEDIA Sensors USA in Austin, Texas Relocation of BEDIA Motorentechnik and BEDIA Kabel to the new corporate building in Altdorf in the industrial park near the A6. Takeover of the production for sensors from the business entit E-T-A in Altdorf Spin-off of the new BEDIA Kabel business unit from BEDIA Motorentechnik GmbH & Co. KG into BEDIA Kabel GmbH & Co. KG. Reorganization of BEDIA Motorentechnik GmbH into BEDIA Motorentechnik GmbH & Co. KG, preparation and the transfer of business administration to Holger Schultheis. Sale of the water treatment business...

In a robust brass or stainless steel housing there is a bimetal disc, which snaps over when nominal switching temperature is reached. The switching contact can be implemented as a normally closed contact or a normally open contact in the temperature range between -25°C and 190°C. The switch opens or closes its contact upon rising temperature and resets automatically to the original switching state when the temperature has dropped. The switching temperature cannot be adjusted. The bimetal disc carries no current, and this eliminates the possibility of arcing. The reset switching temperature is...

Connector bayonet according to ISO 15170 Protection class IP 69K according to DIN 40050 without thermal conductivity probe Connector DEUTSCH DT04-2P Protection class IP 67 according to DIN 40050 without thermal conductivity probe » Order number overview page 8 » Order number overview page 9 Connector minitimer 2,8 x 0,8 Protection class IP 67 according to DIN 40050 without thermal conductivity probe Connector minitimer 2,8 x 0,8 Protection class IP 67 according to DIN 40050 with thermal conductivity probe » Order number overview page 8 » Order number overview page 8 Connector blade terminal 6,3...

ORDER NUMBER OVERVIEW Bimetal temperature switches with reset hysteresis ≤ 15 K Connector bayonet according to ISO 15170 normally closed potential free Connector bayonet 10SL plastic normally closed potential free normally open normally closed normally closed normally open normally open normally closed normally closed potential free potential free potential free potential free potential free potential free potential free Connector blade terminal 6,3 x 0,8; 1-pole normally open normally closed normally open Low side switch Low side switch Low side switch

Bimetal temperature switches with reset hysteresis < 15 K Connector blade terminal 6,3 x 0,8; 2-pole M 14 x 1,5 / 22 12 mm 95°C normally closed < 20 K potential free 422 869 2.] 9/16" UNF / 22 12 mm 95°C normally closed < 20 K potential free 422 870 2. Cable connection M 12x1,5/19 18 mm 105°C normally closed < 20 K potential free 500mm Y 422 856 |T] M 14x1,5/22 / 95°C normally closed 15 K potential free 570mm Y 422 218 U] 1* Cable with flying leads 3* Cable with Deutsch connector DT04-3P 2* Cable with Deutsch connector DT04-2P 4* Cable with connector M12x1

These temperature switches operate by means of a thermally sensitive bimetal snap-element which switches a double electrical contact when reaching a pre-set response temperature. They can be normally open or normally closed. The electrical current flows through the bimetal element, which therefore gives a combination of temperature- and current-sensitivity. The resilient snap action disk ensures excellent performance. The bimetal will only snap back to its initial condition after the temperature has dropped significantly. Compared to other temperature switches with relatively small hysteresis,...

Connector bayonet according to ISO 15170 Protection class IP 69K according to DIN 40050 with thermal conductivity probe Connector bayonet 10 SL according to VG 95234 Protection class IP 67 according to DIN 40050 with thermal conductivity probe » Order number overview page 12 » Order number overview page 12 Connector minitimer 2,8 x 0,8 Protection class IP 67 according to DIN 40050 with thermal conductivity probe Connector bayonet 10 SL plastic Protection class IP 67 according to DIN 40050 with thermal conductivity probe » Order number overview page 13 » Order number overview page 13 Connector...

ORDER NUMBER OVERVIEWBimetal temperature switches with reset hysteresis < 25 KConnector bayonet according to ISO 15170 M 14 x 1,5 / 27 11 mm 50°C normally open < 15 K potential free 422 874 DJ M 14 x 1,5 / 27 11 mm 60°C normally closed < 20 K potential free 421 069 1-] M 14 x 1,5 / 27 11 mm 90°C normally closed < 20 K potential free 422 849 1. M 14 x 1,5 / 27 11 mm 95°C normally open < 20 K potential free 422 842 1. M 14 x 1,5 / 27 11 mm 100°C normally open < 20 K potential free 422 843 DJ M 14 x 1,5 / 27 11 mm 110°C normally open < 20 K potential free 422 320 DJ M 14 x 1,5 / 27 11 mm 120°C normally...