CellMek SPS
3Pages

TECHNICAL SPECIFICATION CellMek SPS Sample Preparation System The CellMek SPS is a sample preparation system for use in flow cytometry laboratories and other laboratories that perform cell analysis. It is a clinical system for in vitro diagnostic use. The purpose of the product is to prepare specimens from a variety of human sources such as whole blood, bone marrow, and other single cell suspensions. It will automatically aliquot the specimen, add antibodies or other appropriate reagents, add lysing reagents, wash the samples if needed, perform mixing and timed incubations and offer fully prepared samples that are ready for analysis. The system includes automatic loading of multiple specimens, full connectivity with Laboratory Information Systems (LIS) and barcode tracking of specimens, samples and reagents. The CellMek SPS Sample Preparation System can prepare samples in carousels compatible with Beckman Coulter Flow Cytometers. Key features of the CellMek SPS Sample Preparation System include: • The CellMek Panel Designer Software lets you design your own protocols that fit a wide variety of applications. • Onboard refrigeration and cap piercing technology reduce daily manual handling of liquid antibodies. • The system provides onboard capacity of up to 12 DURACartridges (12 tests each) and 53 liquid antibody vials. DURACartridges and liquid antibodies can be combined in the same protocol. • Spin Wash Chambers provide onboard washing capability. • All reagents are barcoded to provide automated tracking of reagents for a full audit trail. • Continuous loading and unloading provide flexibility and efficiency. Acoustic Noise Level ≤65 dBa ENVIRONMENT Antibody Storage Temperature 2°C ≤ x ≤ 8°C (controlled and logged) Ambient Operating Temperature 15.5°C to 26.7°C (59.9°F-80.1°F) Operating Humidity Altitude Restrictions Supply Cart CellMek SPS (Drawer open, door raised) Weight Instrument: 187 kg (412 lbs); Supply Cart: 14 kg (31 lbs) * tested under the following conditions: Two cassettes with a total of 8 specimen tubes (4 tubes each) with each specimen assigned to a 4-tube panel. Panel consisted of a specimen wash (4-wash cycles), a liquid antibody cocktail of 100 μL, 15-minute (min) to 45-minute (max) incubation, 2 mL lyse, 10-minute (min) to 15-minute (max) incubation, lyse wash (1-wash cycle). Heat Dissipation 850 W (2900 btu/hour) Minimum Bench Size Height: 58.52 cm (23 in.) Width: 112 cm (44.1 in.) Depth: 76.2 cm (30 in.) SAMPLE PREPARATION Throughput* 32 output tubes in less than 4 hours and 15 minutes when running a 4-tube panel

Specimen dispense Volume: SPECIMEN TUBE COMPATIBILITY Minimum Volume (Total onboard capacity: 6 cassettes, 5 tubes each) Cassette Type CellMek SPS Dead Volume (µL) Stain and Antibody dispense Volume Becton Dickinson Lyse and Prep dispense Volume Per the Panel Designer, minimum blood aspiration is 25 µL. Incl. conditioning volumes total volume ~300 µL if going to cell wash module or 125 µL if going directly to plate. 1 Beckman Coulter ClearLLab Control Cells 12x76 Available Incubation Time Minimum Incubation Time Beckton Dickinson Maximum Incubation Time Pipetting Accuracy Beckman Coulter...

ORDERING INFORMATION Wash Buffer Volume Consumption (mL) Wash Cycles Specimen Wash Sample Wash Part Number 48 Well Plate with 2D Barcode (QTY: 25) Various – custom order Startup and Wash Buffer Prime DURACartridge Dry Reagent Panels Initiate Processing (when “Play” button is pressed) IOTest Vials Empty with Barcode Labels IOTest Pierceable Caps (QTY: 100) Cyto-Stat Pierceable Caps (QTY: 50) Prep Reagent Bottles (Empty) Reagents Barcode Labels, Primary (24 vials of 1 product ID) Reagents Barcode Labels, Secondary (24 unique product IDs) CellMek Panel Designer Software (works on separate...