MDC 1001G1x GbE RJ45 to 1x 100/1000Base SFP Industrial Media Converter • Supports LFPT (Link Fault Pass Through) and FEF (Far End Fault) • Provides a DIP-Switch to set functions • 12/24/48VDC (9.6~60VDC) Redundant input power This compact model is unmanaged industrial grade gigabit Ethernet media converter that support conversion between electrical 10/100/1000Base-T and optical 1000Base-X Ethernet. Housed in rugged DIN rail or wall mountable enclosures, this converter is designed for harsh environments, such as industrial networking and intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications. • IP30 rugged metal housing and fanless • Wide operating temperature -20 ~ 70° C • Store-and-Forward mode and Pass through mode (set by DIP SW) • Conversion between 10/100/1000Base-T and 1000Base-X Fiber cable interface lx GbE RJ45 to lx 100/1000Base SFP Industrial Media Converter Industrial DIN Power Supply DRC-24V30W1AZ 30W Industrial DIN-Rail Power Supply, 24VDC (metal case) Specifications on this datasheet are subject to change without prior notice. | Copyright © BEC Technologies, Inc. Billion Electric Co., Ltd. All rights reserved. v1.1_2023_GL

MDC 1001G1x GbE RJ45 to 1x 100/1000Base SFP Industrial Media Converter Certifications IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet IEEE 802.3ab 1000Base-T Gbit/s Ethernet over twisted pair IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fiber-Optic IEEE 802.3x Flow Control and Back pressure RJ45 Ports 10/100/1000Base-T Auto MDI/MDI-X and Auto negotiation Function Fiber Ports 100/1000Base-X SFP Slot Data Process Architecture Store and Forward Switch mode or Pass through mode set by DIP SW Jumbo Frame 16K Bytes (For Store and Forward Switch mode) Fiber Parameters Fiber Cable (Multi-mode): 50/125um,...