*mydirectindustry

Catalogs
BeanAir GmbH
List of WIFI Router compatible with WILOW IOT Sensors

List of WIFI Router compatible with WILOW IOT Sensors

Product catalog summary

Overview: This document provides a technical summary of various networking devices, including access points, routers, and bridges from different manufacturers such as Ubiquiti, TP-Link, Teltonika, and Robustel. Each device's specifications, features, and security protocols are outlined.

1. Ubiquiti Bullet M:

Functions as an Access Point, Client, or Bridge.
Networking Interface: 10/100 Ethernet Port.
Modes: Station, Access Point, AP Repeater.
Services: SNMP, DHCP, NAT.
Utilities: Site Survey, Antenna Alignment Tool, Discovery Utility.
Security: WEP/WPA/WPA2.

2. TP-Link TL-MR6400:

Functions as an Access Point or Bridge.
Frequency: 2.4GHz with a signal rate of 300Mbps.
Reception Sensitivity: Varies by mode (e.g., 11n HT40: -67dBm).
Transmit Power: CE <20dBm at 2.4GHz.
Wireless Functions: Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics.
Security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions.

3. Teltonika RUT240:

LTE Router supporting UMTS/DC-HSPA+ and GSM/GPRS/EDGE.
Ethernet: 1 LAN and 1 WAN 10/100Mbps ports.
WiFi: IEEE 802.11b/g/n standards, AP and STA modes.
Security: 64/128-bit WEP, WPA, WPA2, WPA&WPA2 encryption methods.
WiFi Frequency Range: 2.401-2.495GHz.

4. Teltonika RUT950:

Compact 4G router with SIM slot and 4 Ethernet ports.
Supports multiple LTE FDD bands with speeds up to 100 Mbps DL and 50 Mbps UL.

5. Robustel R3000:

LTE Router with 2 x 10/100 Mbps Ethernet ports.
Wi-Fi Interface: Supports 802.11a/b/g/n standards, AP and Client modes.
Frequency Bands: 2.4 GHz and 5 GHz ISM bands.
Security: Open, WPA, WPA2, WEP with AES, TKIP, WEP64 encryption.
Optional GPS/GLONASS Interface with high tracking sensitivity.

Catalog excerpts

List of WIFI Router compatible with WILOW IOT Sensors-1

List of WIFI Bridges, Routers and AP used with Wilow Sensors Ref. Functions Bullet M Titanium from Ubiquiti Access Point, Client or Bridge Networking Interface :(1) 10/100 Ethernet Port Modes: Station, Access Point, AP Repeater Services: SNMP, DHCP, NAT Utilities: Site Survey with Preferred SSID, Antenna Alignment Tool, Discovery Utility Security : WEP/WPA/WPA2 TL-MR6400 from TPLink RUT240 from Teltonika Frequency: 2.4GHz Signal Rate: 300Mbps at 2.4GHz Reception Sensitivity: 11g 54M: -74dBm 11n HT20: -71dBm Access Point, Bridge 11n HT40: -67dBm Transmit Power: CE <20dBm(2.4GHz) Wireless Functions: Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics Wireless Security :64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions UMTS/DC-HSPA+: 850/900/2100 MHz DC-HSPA+ mode: Max 42Mbps (DL) Max 5.76Mbps (UL) UMTS mode: 384 kbps DL, 384 kbps UL TD-SCDMA: Max 4.2Mbps (DL) Max 2.2Mbps (UL) GSM/GPRS/EDGE: 900/1800 Mhz GPRS/EDGE Multi-slot Class 12 ETHERNET: LTE Router IEEE 802.3, IEEE 802.3u standards 1 x LAN 10/100Mbps Ethernet port 1 x WAN 10/100Mbps Ethernet port WIFI: IEEE 802.11b/g/n WiFi standards AP and STA modes 64/128-bit WEP, WPA, WPA2, WPA&WPA2 encryption methods 2.401-2.495GHz WiFi frequency range 20dBm max WiFi TX power SSID stealth mode and access control based on MAC address

Open the catalog to page 1

All BeanAir GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list