BeanAir® Sensors Brand WIRELESS IoT Bi-Axis INCLINOMETER quick start user guide mechanical drawing SATEVIS ALPHA-INC Scalable Measuring Range (±30° and ±55°)

Wireless IOT Bi-Axis Inclinometer 1 Main Features Sensor resolution: ( 0.00183° ° for ±30° range, 0.00366° for ±55° range ) LoRaWAN® Protocol: 15km Radio Range Scalable Measuring Range: ±30° and ±55° IP67 | Nema 6 / IP68 (M8 Connector cap mounted , self-fusing is used around antenna connector) Excellent radio link. Non-Rechargeable Battery Pack (3S1P configuration) - Lithium Thionyl Chloride Capacity 6.5Ah , Max Voltage 10.8Volts *15km Radio range if the device is in Line of sight , sensor configuration: +22dBm Radio Power, +5dBi Antenna, Gateway is ins- talled on a Mast, 25 meters Height, +8dBi...

Wireless IOT Bi-Axis Inclinometer 3 APPLICATIONS RAILWAY SLEEPERS CONDITION MONITORING LAND SURVEYING STRUCTURAL HEALTH MONITORING CARGO SHIP ANTENNA BASE STATION CONSTRUCTION SITE

Wireless IOT Bi-Axis Inclinometer 4 Instant Sensor Verification with ‘Hello!’ function Caption1: After installing the Alpha-Inc inclinometer Caption2: By Holding the magnet on the ‘Hello!’ , the field operator can check at any moment if the label for more than 10s, the sensor wakes-up and sensor is working properly. transmits to the Lorawan network the data measurement followed by the system diagnostic ( battery status and network quality). Caption3: The Activity Led blinks in green color, confir- Caption4: The field operator can check on Satevis® ming that a data measurement is transmitted to...

Wireless IOT Bi-Axis Inclinometer 4 Effortless Sensor Installation with Automatic Zeroing Caption1: Even if an angle bracket is used, it’s some- Caption2: To enable the sensor zeroing function, times difficult to bring a zero-offset on both X and Y hold the magnet on ‘Sensor Zeroing” Label for more axis . In some cases, the field operator can not spend than 10s. too much time on this task. Caption3: The Activity LED blinks in blue, the sensor Caption4: The Sensor-zeroing process can be also zeroing starts on both X and Y axis . When this pro- done remotely from the cloud software. cess is done,...

Wireless IOT Bi-Axis Inclinometer 5 TECHNICAL SPECIFICATIONS PRODUCT REFERENCE SAT-LORA-ALPHA-INC-MR-RP-AG MR– Measurement Range: 30B : Bi-axis ±30°/±55° RP- Radio Power HP - High Power Transmission +22dBm LP - Low Power Transmission +14dBm AG - Antenna Gain 2dBi-868: 2dBi Antenna for 5dBi-868: 5dBi Antenna for 2dBi-915: 2dBi Antenna for 5dBi-915: 5dBi Antenna for EU/IND Regions (Europe /India) EU/IND Regions (Europe /India) US/KR/AS/AU Regions (USA/KOREA/ASIA/AUSTRALIA) US/KR/AS/AU Regions (USA/KOREA/ASIA/AUSTRALIA) Example 1: SAT-LORA-ALPHA-INC-30B-LP-2dBi-868, Wireless Bi-axis Inclinometer...

Wireless IOT Bi-Axis Inclinometer Inclinometer Sensor Inclinometer Technology MEMS Technology Scalable Measuring Range user-seletctable range ±30° or ±55°, with automatic range adjustment depending on the application Sensor resolution Noise density Sensor Precision/Repeatability ( full scale, 25°C) Sensor Accuracy (full scale, @ 25°C ) ±0.005° for ±10° range ±0.01° for ±45° range ±0.02° outside ±45° range Offset temperature dependency (temperature range –25°C to +85°C) Offset LifeTime Drift (@25°C) Sensor frequency Response (-3 dB) DC to 10 Hz for ±30° measurement range DC to 40 Hz for ±55° measurement...

satevis sensor configurator (from use) Configuration Firmware Upgrade Sensor calibration Frequency Plan, Device EUI, AppEUI, AppKey Firmware upgrade through the USB Calibrations Points setup and Quick calibration rf specifications LoRaWAN® Stack LoRaWAN® V1.0.2 REVB CLASS A Activation Mode OTAA Frequency Plan can be configured from USB: LoRaWAN® Frequency Plan - Asia 923MHZ Important : Depending on the destination region, Satevis Device will be delivered with Antenna for 868MHZ Frequecies ( Europe/India), or 915MH frequencies (USA/KOREA/ASIA/Ausrtalia) TX Power HP - High Power Transmission +22dBm...

Wireless IOT Bi-Axis Inclinometer TECHNICAL SPECIFICATIONS Environmental and Mechanical Aluminum & Waterpoof casing Dimensions in mm (LxWxH): 151x130x55 mm Weight : 950g IP67 | Nema 6 / IP68 (M8 Connector cap mounted , self-fusing is used around antenna connector) Shock resistance Mounting base Screw mounting & magnetic mounting Operating Temperature -40°C to +75°C Sunshield should be used if the device is exposed to sun radiation from +68°C Relative Humidity Norms & Radio certifications ·CE Labelling Directive R&TTE (Radio) ETSI EN 300 328 ·FCC (North America) ·ARIB STD-T66 Ver 3.6 HS Code: 9031.80.20...

Wireless IOT Bi-Axis Inclinometer Available functions ON/OFF Mechanical latching Push button Transmits Data on user request , works with a magnet pointing to Hello label sensor zeroing on user request , works with a magnet pointing to sensor zeroing label Sensor Zeroing Green: network connection, data tranmsision Blue: Sensor zeroing successful/Hello Message Transmitted successfully Optional Accessories and Services 90° Bracket Mounting 90° Bracket mounting (with integrated eyelet) with 4 x M5 screws + Locknut Ref: SAT-BRACK-MNT External Sensors External Temperature and Humidity Sensor Calibration...

Wireless IOT Bi-Axis Inclinometer 6 Mounting Options Option 90° Bracket + with Bullseye ON/OFF Button-Shield Screw and Magnetic Mounting Base Designed for Harsh Environment from cold to tropical Countries All Satevis® sensors designed with a Rugged and Waterproof (IP67 ) Aluminum casing and integrate a Protective Vent, with Humidity and Pressure compensation. Satevis® Alpha-Inc comes with 2 levels of protection: • IP67 Aluminum alloy casing. • Electromagnetic protection with Shielded gasket on the lid. • Ruggedized and ultra-lowpower electronic design -40°C to +75°C. • Humidity and Pressure Vent....