video corpo

Datasheet BeanDevice Wilow AX-3DS , WIFI Shock sensor for Industrial IOT application
10Pages

{{requestButtons}}

Catalog excerpts

Datasheet BeanDevice Wilow AX-3DS , WIFI Shock sensor for Industrial IOT application - 1

WILOW AX-3DS ULP (Ultra-Low-Power) WIRELESS IOT SHOCK SENSOR Product Video user guide quick start Main Features step file • ULP (Ultra Low Power) Wifi technology • Scalable shock measurement range: ±2/4/8/16g • Store and Forward+: lossless data transmission • Embedded data logger: up to 5 million data points (with events dating) • Excellent radio link relying on the radio antenna diversity designed by Beanair® • SSD (Smart Shock Detection) allows to trigger data acquisition on a shock detection • IIOT Ready: integrates MQTT data exchange, an open-source Internet of Things (IOT) protocol • Waterproof (IP67|NEMA 6) and Rugged aluminum casing, mqtt toolkIt for iot sensor • USB 2.0 link for device configuration (including firmware upgrade) • Smart and Flexible power supply : - Internal Rechargeable Lithium Battery (780 mAh) - External 5VDC power supply compatible with both USB power and solar energy harvesting • Over the Air Firmware Upgrade via WIFI • Virtual Inclinometer

Open the catalog to page 1
Datasheet BeanDevice Wilow AX-3DS , WIFI Shock sensor for Industrial IOT application - 2

Structural Health Monitoring Condition Monitoring AN OPEN-STANDARD & INDUSTRIAL WIFI TECHNOLOGY • ULP (Ultra Low power) Wifi – IEEE 802.11 b/g/n • Lower total cost of ownership-works with existing access points • Large installed base and consequent broad-based familiarity with configuration, use and troubleshooting at the physical and link layers • Easy provisioning & IT friendly : our ULP wifi sensors use IP-over-Ethernet networking environment

Open the catalog to page 2
Datasheet BeanDevice Wilow AX-3DS , WIFI Shock sensor for Industrial IOT application - 3

WILOW AX-3DS MQTT | Open-Standard Internet of Things protocol. wireless IOT supervision software Third - party WIFI Bridge IOT Third - party Wifi Access Point WIFI Access Point EHR-Auxiliary Power Supply compatible with solar energy harvesting 8-24VDC Third - party WIFI Bridge Third - party Wifi Access Point wireless IOT supervision software A RELIABLE WIFI TECHNOLOGY THANKS TO OUR “ STORE AND FORWARD+ ” FUNCTION The store and forward technique works by storing the message transmitted by the BeanDevice® Wilow (wireless DAQ/sensor) to a Wifi access point/ Wifi receiver. If the message is not...

Open the catalog to page 3
Datasheet BeanDevice Wilow AX-3DS , WIFI Shock sensor for Industrial IOT application - 4

WILOW AX-3DS TECHNICAL SPECIFICATIONS PRODUCT REFERENCE BND-WILOW-WIFI-AX3DS-MR-MO-EXPWR MR - Measurement Range: BR - 90° Mounting bracket M - Magnetic Mounting EXPWR -Auxiliary External Power supply EHR - Power supply compatible with solar energy harvesting 8-24VDC Example 1: BND-WILOW-WIFI-AX3DS-BR Wireless IOT Shock sensor with 90° Mounting bracket Example 2: BND-WILOW-WIFI-AX3DS-M Wireless IOT Shock sensor with magnet mounting Example 3: BND-WILOW-WIFI-AX3DS-EXPWR Wireless IOT Shock sensor , with auxiliary external Power supply compatible with Energy Harvesting 8-24VDC SHOCK SENSOR...

Open the catalog to page 4
Datasheet BeanDevice Wilow AX-3DS , WIFI Shock sensor for Industrial IOT application - 5

TECHNICAL SPECIFICATIONS Remote configuration parameters Data Acquisition mode (SPS = sample per second) Sampling Rate (in streaming mode) Alarm Threshold Power Mode • Low Duty Cycle Data Acquisition (LDCDA) Mode: 1s to 24 hour • Alarm -Low duty cycle: 1s to 24 hour • Streaming mode : 100 SPS by default • Streaming with event-trigger (SET) Mode : 100 SPS by default Minimum: 1 SPS Maximum: 1.6 kSPS per axis High and Low Levels alarms Battery Saver & Active power modes RF Specifications Wireless Protocol Stack WSN Topology Crypto Engine Data rate RF Characteristics TX Power Rx Sensitivity...

Open the catalog to page 5
Datasheet BeanDevice Wilow AX-3DS , WIFI Shock sensor for Industrial IOT application - 6

WILOW AX-3DS TECHNICAL SPECIFICATIONS Embedded Data logger Storage Capacity Wireless data downloading up to 5 million data points 3 minutes to download the full memory (average time) Environmental and Mechanical Casing IP | NEMA Rating Shock resistance Operating Temperature Norms & Radio Certifications Aluminum casing Dimensions in mm (LxWxH) : 35x59x65 mm without antenna & eyelet, Weight (with internal battery, w/o mounting option) : 220g IP67 | Nema 6 100g during 50 ms -40 °C to +65 °C • CE Labelling Directive R&TTE (Radio) ETSI EN 300 328(Europe) • FCC (North America) • ARIB STD-T66 Ver....

Open the catalog to page 6
Datasheet BeanDevice Wilow AX-3DS , WIFI Shock sensor for Industrial IOT application - 7

WILOW AX-3DS TECHNICAL SPECIFICATIONS Included accessories M8 plastic cap M8 to USB cable 1pcs, Ref: WL-PC 1pcs M8-6pins to USB Cable, 2 meters length. Ref: WL-CBL-M8-6P-USB-2M 1pcs Magnet. Ref: WL-MGN 4 pcs M5 screws+ Locknut. Ref: WL-WIFI-SCMKIT Magnet for power on/power off Wall mounting kit Optional Accessories and Services Power-supply M8 Cable WIFI AP / Repeater / Bridge (wifi link extension) Standalone solar power system Wall plug-in, Switchmode power Supply 12V @ 1,25A with USB plug. Provided with power adapter: North America/Japan/China or Europe or UK or Australia REF:...

Open the catalog to page 7
Datasheet BeanDevice Wilow AX-3DS , WIFI Shock sensor for Industrial IOT application - 8

WILOW AX-3DS TECHNICAL SPECIFICATIONS Optional Accessories and Services Solar Panel Polycrystalline Solar Panel for BeanDevice® Wilow® power supply Maximum Power : 5W , Optimum operating Voltage: 12 VDC Protection Frame: Aluminum Frame , Waterproof IP67 The 3W solar panel works only with LowDutyCycle & Survey/Alarm data acqusiition with battery saver mode enabled The 5W solar panel works only with LowDutyCycle, Survey/Alarm & streaming burst data acqusiition with battery saver mode enabled Country of origin: solar panel from China, assembled and tested in Germany REF: WL-SLP-5W-2M ,5W Solar...

Open the catalog to page 8
Datasheet BeanDevice Wilow AX-3DS , WIFI Shock sensor for Industrial IOT application - 9

WILOW AX-3DS Beandevice® Wilow® Front View Radome Antenna on Both sides M8-6 pins connector for USB & Power supply External Power supply wiring code M8-6Pins socket ( Male, A-Coding) - PIN ASSIGNATION PIN 6: GND PIN 5: DC Voltage 8-24VDC (-EHR version only) Interface Name 5VDC Voltage DATA DATA + Not used DC Voltage 8-24VDC (-EHR version only) GND M8-6Pins Plug ( Female, A-Coding) - PIN ASSIGNATION PIN 6:GND PIN 3:USB-DATA + PIN 5:DC Voltage 8-24VDC (-EHR version only) Interface Name M8 Pin assignation Wire Color (A-coding) DC Voltage 8-24VDC (-EHR version only)

Open the catalog to page 9
Datasheet BeanDevice Wilow AX-3DS , WIFI Shock sensor for Industrial IOT application - 10

WILOW AX-3DS Mechanical Mounting Options By default, the BeanDevice® Wilow® comes with a screw mounting lid. Two other mounting options are available: • Magnetic mounting , add the extension –M on your product reference • 90° bracket, add the extension –BR on your product reference sCREWS mOUNTING Mechanical Mounting Options Video mAGNETIC MOUNTING lID VIDE O Above given technical data are only for information purpose. ® BEANAIR GmbH has right to change product specifications without notice.

Open the catalog to page 10

All BeanAir GmbH catalogs and technical brochures

  1. 2.4GHz Hi-Inc

    10 Pages

  2. 2.4GHz ONE-T

    10 Pages

  3. 2.4GHz AN-V

    11 Pages