2.4GHz AX-3DS Wireless IIOT accelerometer sensor| Shock and impact monitoring Product Video quick start mechanical drawing step file Requires BeanGateway® (wireless receiver) for operation. Main Features • Embedded data logger : up to 1 million data points (with events dating) • High Gain Antenna : 400m max LOS* , 60-120m (N.L.O.S.) • Integrated Low-profile Antenna : 150m max* * , 30-60m (N.L.O.S.) • Wireless accelerometer dedicated to shock Scalable measurement range : ±6g/±12g/±24g or ±2g/±4g/±8g • SSD (Smart Shock Detection), wireless sensor can wakeup on shock detection (software configurable) • Waterproof IP67 casing (Nema 6) • Integrated Lithium-Ion battery charger *High Gain Antenna Pointing to Vertical position, BeanGateway® Installed on a mast 10 meters height with 9dBi Antenna **Low Profile Antenna Pointing to Vertical position, BeanGateway® Installed on a mast 10 meters height with 9dBi Antenna

Structural Health Monitoring Condition Monitoring Smart Shock Detection Technology The BeanDevice®2.4GHz AX-3DS integrates a smart shock detection technology which permits to detect & recognize a shock event during the sleeping or deep sleeping mode of the BeanDevice® 2.4GHz AX-3DS. When the BeanDevice®2.4GHz AX-3DS is in sleeping mode, the accelerometer continues to track a shock event with a power consumption of 68 uA in sleeping mode and 28uA in deep sleeping mode. A hystereris on the shock event, fully configurable through the BeanScape® 2.4GHz, allows to avoid false alarm. EXAMPLE : THIS...

False Alarm Event Tracking Real Alarm Δd : shock detection hysteresis. Δt : Observed duration If Δt = Δd, the shock event is detected and recognized, the BeanDevice® wakes up and start data sampling in “streaming mode”. The following tables show the accelerometer sampling rate and the hysteresis time value in deep sleeping mode and sleeping mode of the BeanDevice® 2.4GHz AX-3DS. Accelerometer sampling rate during deep sleeping mode (in HZ) 0.5 1 2 5 10 Accelerometer sampling rate during deep sleeping mode (in HZ) 50 100 400 1000

2.4GHz AX-3DS Shock measurement on pantograph Wireless IOT Sensors Supervision Software Ethernet LAN Interface Wireless IOT Sensors coordinator Outdoor Version Rethinking Sensing Technology Remote Configuration & Monitoring BeanScape® 2.4GHz Basic The BeanScape® 2.4GHz application allows the user to view all the data transmitted by the BeanDevice®2.4 GHz AX-3DS With the OTAC (Over-the-Air configuration) feature. SEVERAL DATA ACQUISITION MODES ARE AVAILABLE ON THE BEANDEVICE® 2.4 GHz AX-3DS : • Low Duty Cycle Data Acquisition mode (LDCDA) : the data acquisition is immediately transmitted by radio....

REMOTE CDNRGURHTIDN & MONITORING ianGateway gh= Wireless I0T Sensors coordinator Indoor Version ^fean Device® Over-the-Air Configuration OFor further information about the different data acquisition modes: TN-RF-008 - “Data acquisition modes available on the BeanDevice®” While the vast majority of wireless IIOT sensors show their limits in harsh industrial environment, the BeanDevice® 2.4GHz AX-3DS integrates an innovative antenna diversity design, boosting the radio link quality in environments subject to random and diverse disturbances. Antenna Diversity improves both the quality and reliability...

f^anDevice 2.4GHz AX-3DS EXAMPLE : SHOCK DETECTION ON A TRAIN Train Runnig Datalogger function is enabled on the : The Train stops at a Train Station • In standalone operation, the BeanDevice® 2.4GHz AX-3DS stores all the measurements on its embedded datalogger. Thus, a direct connection with the BeanGateway® 2.4GHz is not needed. • When the train is moving, all the acquired measurements are stored on datalogger. • Data logs can be transmitted to the BeanGateway® 2.4GHz on request. Once a successful transmission is done, the user can choose to erase automatically the logs from the datalogger...

CONFIGURABLE SETTINGS FROM THE BEHNSGHPEi 2.4GHZ SOFTWARE

TECHNICAL SPECIFICATIONS OPTIONAL ACCESSORIES AND SERVICES • Beangateway is positioned in Line Of Sight toward sensor (no obstacles, no radio interferences) with High Gain Antenna, with a Height of 3 meters minimum. 26dBm High Gain Directional Antenna is used om gateway side. • On sensor side : Radome Antenna should point to Vertical Direction for better Coverity GETTING STARTED WITH R WIRELESS IIOT SENSORSeanGateway ghV Wireless IOT Sensors coordinator Indoor Version OR VhV AX-3DS anGateway 2gh: Wireless IOT Sensors coordinator Outdoor Version ^feanAir' Rethinking Sensing Technology The BeanDevice®...

OeanAir WIRELESS HOT SENSORS feanDevice 2.4GHz AX-3DS BEHMDEVICE 2.4GHZ AX-3DS FRONT VIEW Waterproof Antenna) Network Reset non-contact push button M8 Socket for power ^supply ( 8-28 VDC ) ^ Product specifications are subject to change without notice. Contact Beanair for latest specifications. EXTERNAL POWER SUPPLY WIRING CODE "\ M8 Socket [A-Coding] - Pin Assignation Pin 4

2.4GHz AX-3DS M8 Plug (A –Coding) - Pin Assignation Pin 1 Gnd Pin 4 Pwr+ (4VDC) Xtend version only Do not power PIN4 and PIN3 at the same time, you will damage your Beandevice Options and Accessories External Power-Supply Wall plug-in, Switchmode power Supply 12V @ 1,25A with sealed M8 Plug ( IP67/Nema 6) Ref: M8-PWR-12V M8 extension cable for external power supply Solar Panel Kit High efficiency solar panel with solar charging controller and Lead-acid battery Ref: X-SOL-SLP-VOUT-CL Molded cable with M8-3pins male plug Material: PVC with shield protection IP Rating : IP67 | Nema 6 Cable length:...

2.4GHz AX-3DS drawing “ No screw mounting option, this device should be glue mounted or use a tape/cable-tie ” If you need screw mounting option, please choose version: AX-3DS-SCM Buchholzer Straße 65, 13156 Berlin, Germany Above given technical data are only for information purpose. ® Sensors has right to change product specifications without notice.