WILOW X-INC ULP (Ultra-Low-Power) WIFI IOT combo sensors (vibration and inclination) with built-in data logger Featured Video user guide quick start mechanical drawing step file mqtt toolkIt for iot sensor Main Features • ULP (Ultra Low Power) Wifi technology • USB 2.0 link for device configuration (including firmware upgrade) • First wireless combo sensors on the market integrating accelerometer/inclinometer sensors • Store and Forward+: lossless data transmission • High precision bi-axis inclinometer ±15° or ±30° with great measurement repeatability (±0.003° on full Scale for ±15B version ). • Waterproof (IP67|NEMA 6) and Rugged aluminum casing, • 460000 data logs per sensor channel (streaming mode) • IOT Ready: integrates MQTT data exchange, an open-source Internet of Things (IOT) protocol • Max. Radio range with High Gain Antenna : 100-200m (L.O.S), 40-80m (N.L.O.S.) • Smart and Flexible power supply : - Internal Rechargeable Lithium Battery (900 mAh) - External 5VDC power supply compatible with both USB power and solar energy harvesting

feanDevice' WILOW® X-INC Ground Vibration Monitoring Structural Health Monitoring Land Surveying Condition Monitoring AN OPEN-STANDARD & INDUSTRIAL WIFI TECHNOLOGY • ULP (Ultra Low power) Wifi - IEEE 802.11 b/g/n • Lower total cost of ownership-works with existing access points • Large installed base and consequent broad-based familiarity with configuration, use and troubleshooting at the physical and link layers • Easy provisioning & IT friendly : our ULP wifi sensors use IP-over-Ethernet networking environment

WILOW X-INC MQTT | Open-Standard Internet of Things protocol. wireless IOT supervision software Third - party WIFI Bridge IOT Third - party Wifi Access Point WIFI Access Point EHR-Auxiliary Power Supply compatible with solar energy harvesting 8-24VDC Third - party WIFI Bridge Third - party Wifi Access Point wireless IOT supervision software A RELIABLE WIFI TECHNOLOGY THANKS TO OUR “ STORE AND FORWARD+ ” FUNCTION The store and forward technique works by storing the message transmitted by the BeanDevice® Wilow X-INC to a Wifi access point/ Wifi receiver. If the message is not received due to a...

Sensitivity Ratiometric Error ±2g Version : ±1.25 % (X-Y) , ±0.2 % (Z) Cross Axis Sensitivity 0.02%

OPTIONAL ACCESSORIES AND SERVICES POWER SUPPLY

Conditions: Battery saver mode enabled , Temperature 25degC, BeanDevice listening to new config every 18h Conditions: Battery saver mode enabled , Temperature 25degC, BeanDevice listening to new config every 18h Conditions: Battery saver mode enabled Temperature 25degC Conditions: Battery saver mode enabled iBattery Life with Fast Measurement Rate [Streaming Temperature 25degC I Burst]- with X-SOLAR-7AH or X-SOLAR-14AH All timing combinatios related to streaming burst option >= 3 years (depends on battery cycle life) Battery Life with Fast Measurement Rate (Continuous Streaming)- Internal Battery...

EXTERNAL POWER SUPPLY WIRING CODEM8-6Pins socket ( Male, A-Coding) - PIN ASSIGNATION Notch Interface Name M8-6Pins Plug ( Female, A-Coding) - PIN ASSIGNATION |PIN 6:GND |— |PIN 3:USB-DATA + |- ^Interface Name

WILOW X-INC Mechanical Mounting Options By default, the BeanDevice® Wilow® comes with a screw mounting lid. Two other mounting options are available: • Magnetic mounting , add the extension –M on your product reference • 90° bracket, add the extension –BR on your product reference sCREWS mOUNTING Mechanical Mounting Options Video VIDE O Buchholzer Straße 65, 13156 Berlin, Germany Above given technical data are only for information purpose. ® BeanAir Sensors has right to change product specifications without notice.