WILOW AX-3D ULP (Ultra-Low-Power) WIRELESS IOT VIBRATION SENSOR Product Video user guide quick start mechanical drawing step file mqtt toolket for iot sensor Main Features • ULP (Ultra Low Power) Wifi technology • USB 2.0 link for device configuration (including firmware upgrade) • 772900 data logs per sensor channel (streaming mode) • Store and Forward+: lossless data transmission • High precision accelerometer (measurement range ±2g) with FFT, PPV (Peak-Particle Velocity) and Amplitude calculations • Excellent radio link relying on the radio antenna diversity designed by Beanair® • Waterproof (IP67|NEMA 6) and Rugged aluminum casing, • Over the Air Firmware upgrade via WIFI • Virtual Inclinometer • IOT Ready: integrates MQTT data exchange, an open-source Internet of Things (IOT) protocol • Smart and Flexible power supply : - Internal Rechargeable Lithium Battery (780 mAh) - External 5VDC power supply compatible with both USB power and solar energy harvesting

OeanAir WIRELESS HOT SENSORS feanDev.ee WILOW® AX-3D HPPLICHTIONS Test and Measurement Ground Vibration Monitoring AN OPEN-STANDARD & INDUSTRIAL WIFI TECHNOLOGY • ULP (Ultra Low power) Wifi - IEEE 802.11 b/g/n • Lower total cost of ownership-works with existing access points • Large installed base and consequent broad-based familiarity with configuration, use and troubleshooting at the physical and link layers • Easy provisioning & IT friendly: our ULP wifi sensors use IP-over-Ethernet networking environment

WILOW AX-3D MQTT | Open-Standard Internet of Things protocol. wireless IOT supervision software Third - party WIFI Bridge IOT Third - party Wifi Access Point WIFI Access Point EHR-Auxiliary Power Supply compatible with solar energy harvesting 8-24VDC Third - party WIFI Bridge Third - party Wifi Access Point wireless IOT supervision software A RELIABLE WIFI TECHNOLOGY THANKS TO OUR “ STORE AND FORWARD+ ” FUNCTION The store and forward technique works by storing the message transmitted by the BeanDevice® Wilow (wireless DAQ/sensor) to a Wifi access point/ Wifi receiver. If the message is not received...

OTA Over the air firmware upgrade via WIFI

Conditions: Battery saver mode enabled , Temperature iBattery Life with Slow Measurement Rate (LDCDA) 25degC, BeanDevice listening to new config every 18h External 5W Solar Panel (REF: WL-SLP-5W-2M) Battery Saver mode Enabled, Measurement Cycle 20s to >= 3 years (depends on battery cycle life) 1 measurement per day

BERNDEVICE* WILOW® FRONT VIEW EXTERNAL POWER SUPPLY WIRING CODEM8-6Pins socket [ Male, A-Coding] - PIN ASSIGNATION Notch Interface Name M8-6Pins Plug [ Female, A-Coding) - PIN ASSIGNATION |PIN 6:GND |— |PIN 3:USB-DATA + | ^Interface Name

WILOW AX-3D Mechanical Mounting Options By default, the BeanDevice® Wilow® comes with a screw mounting lid. Two other mounting options are available: • Magnetic mounting , add the extension –M on your product reference • 90° bracket, add the extension –BR on your product reference Mechanical Mounting Options Video sCREWS mOUNTING Buchholzer Straße 65, 13156 Berlin, Germany Above given technical data are only for information purpose. ® BeanAir Sensors has right to change product specifications without notice.