1. Catalogs
  2. BeanAir GmbH
  3. BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet

BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet
1 /8Pages

BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet

BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet
1 /8Pages

Catalog excerpts

BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet-1

2.4GHz ONE-Tir Wireless Industrial IOT Infrared Temperature Sensor | built-in datalogger APPLICATION Video user guide quick start mechanical drawing Main Features • Embedded data logger : up to 1 million data points • Ultra-low power technology IEEE 802.15.4 (up to 7-year battery life) Max wireless range: 300m (L.O.S.) • Primary cell capacity: 2200 mAh (AA size) Lithium-thionyl chloride technology • High precision non-contact temperature measurement (±0,5°C) • Waterproof IP67 polycarbonate enclosure Weight : 120g / Size (Lxlxh) : 119x35x35mm • OPC server allowing real time access from your IT system to the BeanScape® (available on BeanScape® Premium+)

 Open the catalog to page 1
BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet-2

structural Health Monitoring Environmental Monitoring Condition Monitoring advantages • Rapid Analysis of the target system • Highly operational in system with very high temperature • Adapted for working in Hazardous /Sensible environment • No risk of contamination and mechanical effect on the target • High measurement accuracy • Easy integration

 Open the catalog to page 2
BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet-3

2.4GHz ONE-Tir IR Temperature Sensor Accuracy Tobject,°C EMBEDDED DATA LOGGER UP TO 1 MILLION DATA POINTS The BeanDevice® 2.4GHz ONE-TIR integrates an embedded datalogger, which can be used to log data when a Wireless IIOT Sensors can not be easily deployed on your site. All the data acquisition are stored on the embedded flash and then transmitted to the BeanGateway® 2.4GHz when a network is established. The dataLogger function is compatible with all the data acquisition mode available on your BeanDevice® 2.4GHz ONE-TIR : • LowDutyCycle Data Acquisition • Survey EXAMPLE : TEMPERATURE MONITORING...

 Open the catalog to page 3
BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet-4

For further information about data logger, please read the following technical note : TN-RF-007 – “BeanDevice® DataLogger User Guide ” Remote Configuration & Monitoring BeanScape® 2.4GHz Basic The BeanScape® 2.4GHz application allows the user to view all the data transmitted by the BeanDevice® 2.4GHz ONE-TIR With the OTAC (Over-the-Air configuration) feature, the user can remotely configure the BeanDevice® 2.4GHz ONE-TIR • Low Duty Cycle Data Acquisition mode (LDCDA) : the data acquisition is immediately transmitted by radio. The transmission frequency can be configured from 1s to 24h. • Survey...

 Open the catalog to page 4
BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet-5

2.4GHz One-TIR For further information about data logger, please read the following technical note : TN-RF-008 – “Data acquisition modes available on the BeanDevice®” TECHNICAL SPECIFICATIONS PRODUCT REFERENCE BND-2.4GHZ-ONE-Tir IR temperature Sensor Specification Measurement range Sensor Technology Emissivity coefficient Accuracy Measurement resolution Field of View (FOV) -40°C to +85°C for ambient temperature (Ta) -70°C to +380°C for object temperature (To) Thermopile 0 to 1 ( Configurable from the BeanScape®) CF. IR Temperature Table 0.02 °C Cf. Type FOV curve RF Specifications Wireless Technology...

 Open the catalog to page 5
BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet-6

2.4GHz ONE-Tir TECHNICAL SPECIFICATIONS Over-the-air configuration (OTAC) parameters Data Acquisition mode Low Duty Cycle Data Acquisition (LDCDA) Mode: 1s to 24 hour / Alarm mode: 1s to 24 hour 0 to 1 2 high level alarms & 2 low level alarms Sleeping with Network Listening & Active Emissivity coefficient Alarm Threshold Power Mode Embedded data logger Storage capacity Wireless data downloading up to 1 000 000 data points 3 minutes to download the full memory (average time) Environmental and Mechanica Casing Polycarbonate, Waterproof IP67 – Fire Protection : ULV94 Casing dimensions (Lxlxh) : 119...

 Open the catalog to page 6
BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet-7

2.4GHz ONE-Tir Getting started with a Wireless IIOT SensorS The BeanDevice® 2.4GHz ONE-TIR operates only on our Wireless IIOT Sensors , you will need the BeanGateway® 2.4GHz and the BeanScape® 2.4GHz for starting a Wireless IIOT Sensors. Indoor Version Outdoor Version Wireless IIOT Sensors Supervision Software Rethinking Sensing Technology Beandevice® One-Tir Overview Waterproof Antenna EcoSensor Network Reset non-contact push button Eyelet for wall mounting ON/OFF non-contact push button Temperature Sensor probe

 Open the catalog to page 7
BeanDevice ONE-TIR - Wireless Infrared Temperature Sensor with built-in datalogger - Datasheet-8

2.4GHz ONE-Tir Accessories Antenna Primary Cell Lithium-thionyl chloride primary cell (Li-SOCl2) 2,2 Ah Ref: PP2.2DMG Product specifications are subject to change without notice. Contact Beanair for latest specifications

 Open the catalog to page 8

All BeanAir GmbH catalogs and technical brochures

  1. 2.4GHz Hi-Inc

    10  Pages

  2. 2.4GHz ONE-T

    10  Pages

  3. 2.4GHz ONE-TH

    9  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.