BeanDevice AX-3D - Wireless accelerometer with built-in datalogger - datahseet
12Pages

2.4GHz AX-3D High Performance wireless vibration sensor | acceleration and velocity monitoring Product Video application Video user guide quick start mechanical drawing 155g step file Main Features • Embedded data logger : up to 1 million data points (with events dating) • Wireless accelerometer (measurement range ±2g or ±10g) FFT and DIN4150-3 (Ground Vibration) modules available • Excellent radio link relying on the radio antenna diversity developed by Beanair® • Waterproof IP67 casing (Nema 6) • Time-synchronized wireless sensor networks (±2.5ms of accuracy) • Integrated Lithium-Ion battery charger

Structural Health Monitoring Condition Monitoring Land Surveying

2.4GHz AX-3D Time-Synchronized Wireless IIOT SensorS Clock Transmission Wireless IOT Sensors Supervision Software Wireless IOT Sensors coordinator Indoor Version Remote Configuration & Monitoring Configure and monitor your Wireless IIOT Sensors from an unique BeanScape®2.4Ghz , a powerful Wireless IIOT Sensors supervision software, allows the user to: • visualize in real-time sensing data • remotely configure the BeanDevice®2.4Ghz AX-3D Several data acquisition are available on the BeanDevice®2.4Ghz AX-3D • Low Duty Cycle Data Acquisition mode (LDCDA) : the data acquisition is immediately...

2.4GHz AX-3D Connect our Wireless IIOT Sensors to a third-party supervision software software BeanScape®2.4Ghz Premium+ integrates an OPC DA server (Data Access). OPC DA is particularly well suited for real time measurement and data sharing. Each data/measurement can be associated to a tag or its attributes and shared with one or many OPC clients. For further information about the different data acquisition modes: TN-RF-008 – “Data acquisition modes available on the BeanDevice®2.4Ghz” Vibration Analysis Report at a glance The BeanScape®2.4Ghz comes with advanced tools for user working on...

Rethinking Sensing Technology Wireless IOT Sensors coordinator Indoor Version Transmits all the data logs Request for logs Transmission Datalogger function is enabled ® on tne BeanDevice For further information about data logger, please read the following technical note : TN-RF-007 – “BeanDevice® DataLogger User Guide ”

2.4GHz AX-3D TECHNICAL SPECIFICATIONS PRODUCT REFERENCE BND-2.4GHZ-AX3D-MRG-RB MR – Measurement Range (1g = 9806.65 mm/s^2) 2: ±2g measurement range 10 : ±10g measurement range Example : BND-2.4GHZ-AX-3D-10G-RB, Wireless Accelerometer with 10g measurement range Accelerometer specifications Accelerometer technology Sensitivity Typical non-linearity (Full scale, @ 25°C) Analog to Digital converter Sensor frequency response (-3 dB) Noise spectral density Zero-g Offset Variation from RT over Temp Sensitivity Variation from RT over Temp Offset Ratiometric Error Sensitivity Ratiometric Error...

2.4GHz AX-3D TECHNICAL SPECIFICATIONS RF Specifications Wireless Technology Ultra-Low-Power and license-free 2.4Ghz radio technology (IEEE 802.15.4E) Point-to-Point / Star 250 Kbits/s ISM 2.4GHz – 16 Channels. Antenna diversity designed by Beanair® +18 dBm -104dBm 500 m in Line-Of-Sight 30-100 m in Non-Line-of-Sight Omnidirectional radome antenna with antenna diversity Gain : 3 dBi Waterproof IP67 WSN Topology Data rate RF Characteristics TX Power Receiver Sensitivity Maximum Radio Range Antenna Embedded Data logger Storage capacity Wireless data downloading up to 1 millions data points 3...

Power supply Integrated battery charger Current consumption @3,3V External power supply Rechargeable Lithium-Polymer battery IIntegrated Lithium-ion battery charger with high precision battery monitoring : · Overvoltage/Overcurrent/Short-Circuit/Undervoltage protection · Battery Temperature monitoring · During data acquisition : 20 to 30 mA · During Radio transmission : 70 mA @ 18 dBm · During Battery Saver Mode : < 30 µA 8-28VDC with reverse polarity protection Capacity 1.25 Ah Included accessories 1x Magnet to Power ON/Power OFF the device 1x M8 Cap for Power Supply Optional Accessories...

2.4GHz AX-3D Getting started with a Wireless IOT Sensors The BeanDevice®2.4Ghz AX-3D operates only on our Wireless IOT Sensors, you will need the BeanGateway®2.4Ghz and the BeanScape®2.4Ghz for starting a Wireless IOT Sensors. Wireless IOT Sensors coordinator Indoor Version OR Wireless IOT Sensors Supervision Software Wireless IOT Sensors coordinator Outdoor Version Rethinking Sensing Technology For further information about BeanDevice® battery life : TN-RF-002 Current consumption in active & sleeping mode TN-RF-012 Beandevice autonomy in Streaming and Streaming Packet Mode

Waterproof Antenna Network Reset non-contact push button 2.4 GHz AX-3D M8 Socket for power supply ( 8-28 VDC ) ON/OFF non-contact button Product specifications are subject to change without notice. Contact Beanair for latest specifications. External Power supply wiring code M8 Socket (A-Coding) - Pin Assignation Pin 4 Pwr+ (4VDC) Xtend version only Pin 3 Pwr+ (8-28VDC) Interface Name Power Supply 8-28VDC Power Supply 4VDC (available on Xtend version only) Ground Wire Color (A-coding) Blue Black Brown

2.4GHz AX-3D M8 Plug (A –Coding) - Pin Assignation Pin 4 Pwr+ (4VDC) Xtend version only Do not power PIN4 and PIN3 at the same time, you will damage your Beandevice Options and Accessories Solar Panel Kit High efficiency solar panel with solar charging controller and Lead-acid battery Ref: X-SOL-SLP-VOUT-CL M8 extension cable for external power supply Molded cable with M8-3pins male plug Material: PVC with shield protection IP Rating : IP67 | Nema 6 Cable length: 2 meters , Ref: CBL-M8-2M Cable length : 5 meters, Ref: CBL-M8-5M Cable length: 10 meters, Ref: CBL-M8-10M External Power-Supply...