2.4GHz ONE-Tir Wireless Industrial IOT Infrared Temperature Sensor | built-in datalogger APPLICATION Video user guide quick start mechanical drawing Main Features • Embedded data logger : up to 1 million data points • Waterproof IP67 polycarbonate enclosure Weight : 120g / Size (Lxlxh) : 119x35x35mm • Ultra-low power technology IEEE 802.15.4 (up to 7-year battery life) Max wireless range: 300m (L.O.S.) • Primary cell capacity: 2200 mAh (AA size) Lithium-thionyl chloride technology • High precision non-contact temperature measurement (±0,5°C)

Medical lab S white room Environmental Monitoring • Rapid Analysis of the target system • Highly operational in system with very high temperature • Adapted for working in Hazardous /Sensible environment • No risk of contamination and mechanical effect on the target • High measurement accuracy • Easy integration

IR TEMPERATURE SENSOR ACCURACY The BeanDevice® 2.4GHz ONE-TIR integrates an embedded datalogger, which can be used to log data when a Wireless IIOT Sensors can not be easily deployed on your site. All the data acquisition are stored on the embedded flash and then transmitted to the BeanGateway® 2.4GHz when a network is established. The dataLogger function is compatible with all the data acquisition mode available on your BeanDevice® 2.4GHz ONE-TIR : • LowDutyCycle Data Acquisition EXAMPLE : TEMPERATURE MONITORING ON PIPE • In standalone operation, the BeanDevice® 2.4GHz ONE-TIR stores all the...

For further information about data logger, please read the following technical note : TN-RF-007 – “BeanDevice® DataLogger User Guide ” Remote Configuration & Monitoring BeanScape® 2.4GHz Basic The BeanScape® 2.4GHz application allows the user to view all the data transmitted by the BeanDevice® 2.4GHz ONE-TIR With the OTAC (Over-the-Air configuration) feature, the user can remotely configure the BeanDevice® 2.4GHz ONE-TIR • Low Duty Cycle Data Acquisition mode (LDCDA) : the data acquisition is immediately transmitted by radio. The transmission frequency can be configured from 1s to 24h. • Survey...

^feanScape %^anGateway 2.4GHz One-TIR OFor further information about data logger, please read the following technical note : TN-RF-008 - “Data acquisition modes available on the BeanDevice®” PRODUCT REFERENCE

• Beangateway is positioned in Line Of Sight toward sensor (no obstacles, no radio interferences) with High Gain Antenna, with a Height of 3 meters minimum. 26dBm High Gain Directional Antenna is used om gateway side. • On sensor side : Radome Antenna should point to Vertical Direction for better coverity

2.4GHz ONE-Tir Getting started with a Wireless IIOT SensorS The BeanDevice® 2.4GHz ONE-TIR operates only on our Wireless IIOT Sensors , you will need the BeanGateway® 2.4GHz and the BeanScape® 2.4GHz for starting a Wireless IIOT Sensors. Indoor Version Outdoor Version Wireless IIOT Sensors Supervision Software Rethinking Sensing Technology Beandevice® One-Tir Overview Waterproof Antenna EcoSensor 2.4GHz ONE-TIR ON/OFF non-contact push button Network Reset non-contact push button Eyelet for wall mounting Temperature Sensor probe

2.4GHz ONE-Tir Accessories Antenna Primary Cell Lithium-thionyl chloride primary cell (Li-SOCl2) 2,2 Ah Ref: PP2.2DMG Product specifications are subject to change without notice. Contact Beanair for latest specifications Buchholzer Straße 65, 13156 Berlin, Germany Above given technical data are only for information purpose. ® BeanAir Sensors has right to change product specifications without notice.