2.4GHz AX-3DS Wireless IIOT accelerometer sensor| Shock and impact monitoring Product Video FEATURED Video user guide quick start step file Main Features • Embedded data logger : up to 1 million data points (with events dating) • Wireless accelerometer dedicated to shock Scalable measurement range : ±6g/±12g/±24g or ±2g/±4g/±8g • SSD (Smart Shock Detection), wireless sensor can wakeup on shock detection (software configurable) • Waterproof IP67 casing (Nema 6) • Excellent radio link relying on the radio antenna diversity developed by Beanair® • Integrated Lithium-Ion battery charger

Structural Health Monitoring Condition Monitoring Smart Shock Detection Technology The BeanDevice®2.4GHz AX-3DS integrates a smart shock detection technology which permits to detect & recognize a shock event during the sleeping or deep sleeping mode of the BeanDevice® 2.4GHz AX-3DS. When the BeanDevice®2.4GHz AX-3DS is in sleeping mode, the accelerometer continues to track a shock event with a power consumption of 68 uA in sleeping mode and 28uA in deep sleeping mode. A hystereris on the shock event, fully configurable through the BeanScape® 2.4GHz, allows to avoid false alarm. EXAMPLE : THIS...

False Alarm Event Tracking Real Alarm Δd : shock detection hysteresis. Δt : Observed duration If Δt = Δd, the shock event is detected and recognized, the BeanDevice® wakes up and start data sampling in “streaming mode”. The following tables show the accelerometer sampling rate and the hysteresis time value in deep sleeping mode and sleeping mode of the BeanDevice® 2.4GHz AX-3DS. Accelerometer sampling rate during deep sleeping mode (in HZ) 0.5 1 2 5 10 Accelerometer sampling rate during deep sleeping mode (in HZ) 50 100 400 1000

2.4GHz AX-3DS Shock measurement on pantograph Wireless IOT Sensors Supervision Software Ethernet LAN Interface Wireless IOT Sensors coordinator Outdoor Version Rethinking Sensing Technology Remote Configuration & Monitoring BeanScape® 2.4GHz Basic The BeanScape® 2.4GHz application allows the user to view all the data transmitted by the BeanDevice®2.4 GHz AX-3DS With the OTAC (Over-the-Air configuration) feature, the user can remotely configure the V SEVERAL DATA ACQUISITION MODES ARE AVAILABLE ON THE BEANDEVICE® 2.4 GHz AX-3DS : • Low Duty Cycle Data Acquisition mode (LDCDA) : the data acquisition...

2.4GHz AX-3DS Remote Configuration & Monitoring BeanScape® 2.4 GHz Premium+ The BeanScape® 2.4GHz Premium+ integrates an OPC DA server (Data Access). OPC DA is particularly well suited for real time measurement and data sharing. Each data/measurement can be associated to a tag or its attributes and shared with one or many OPC clients. Wireless IOT Sensors coordinator Indoor Version Over-the-Air Configuration For further information about the different data acquisition modes: TN-RF-008 – “Data acquisition modes available on the BeanDevice®” Antenna diversity While the vast majority of wireless...

2.4GHz AX-3DS EXAMPLE : SHOCK DETECTION ON A TRAIN In standalone operation, the BeanDevice® 2.4GHz AX-3DS stores all the measurements on its embedded datalogger. Thus, a direct connection with the BeanGateway® 2.4GHz is not needed. When the train is moving, all the acquired measurements are stored on datalogger. Data logs can be transmitted to the BeanGateway® 2.4GHz on request. Once a successful transmission is done, the user can choose to erase automatically the logs from the datalogger memory, so new ones can be stored. For further information about the Datalogger, please read the following...

2.4GHz AX-3DS TECHNICAL SPECIFICATIONS Sensor specifications Accelerometer Technology Scalable measurement range Measurement resolution Typical non-linearity (Full scale, @ 25°C) Sensitivity change Vs temperature Zero-g level change vs temperature (max delta from 25°C) Typical zero-g level offset accuracy Analog to Digital converter Noise spectral density @ BW 10Hz Anti-aliasing filter Configurable settings from the BeanScape® 2.4GHz software Data Acquisition mode (SPS = sample per second) Dynamic data acquisition: Streaming and SSD ( Smart Shock Detection) Shock detection function • Shock threshold...

2.4GHz AX-3DS TECHNICAL SPECIFICATIONS RF Specifications Wireless Technology WSN Topology Data rate RF Characteristics TX Power Receiver Sensitivity Maximum Radio Range Antenna Ultra-Power and license-free 2.4Ghz radio technology (IEEE 802.15.4E) Point-to-Point / Star 250 Kbits/s ISM 2.4GHz – 16 Channels. Antenna diversity designed by Beanair® +18 dBm -104dBm 500 m in Line-Of-Sight 30-100 m in Non-Line-of-Sight Omnidirectional radome antenna with antenna diversity Gain : 3 dBi Waterproof IP67 Environmental and Mechanical Casing IP | NEMA Rating Shock resistance Operating Temperature Norms Aluminum...

2.4GHz AX-3DS TECHNICAL SPECIFICATIONS Optional Accessories and Services External Power Supply Wall plug-in, Switchmode power Supply 12V @ 1.25A with sealed M8 Plug (IP67/Nema 6) Ref: M8-PWR-12V Molded cable with M8-3pins male plug Material: PVC with shield protection IP Rating : IP67 | Nema 6 Cable length: 2 meters , Ref : CBL-M8-2M Cable length : 5 meters, Ref : CBL-M8-5M Cable length: 10 meters, Ref : CBL-M8-10M Calibration certificate provided by Beanair GmbH A static calibration method is used on a granite surface plate DIN876 Ref: CERT-CAL-SMART M8 extension cable for external power supply...

2.4GHz AX-3DS Beandevice® 2.4GHZ AX-3DS Front View Waterproof Antenna Battery charge led Network Reset non-contact push button 2.4GHz AX-3DS M8 Socket for power supply ( 8-28 VDC ) On/Of non-contact button Product specifications are subject to change without notice. Contact Beanair for latest specifications. External Power supply wiring code M8 Socket (A-Coding) - Pin Assignation Pin 4 Pwr+ (4VDC) Xtend version only Pin 3 Pwr+ (8-28VDC) Interface Name Power Supply 8-28VDC Power Supply 4VDC (available on Xtend version only) Ground Wire Color (A-coding) Blue Black Brown M8 Plug (A –Coding) - Pin...