BeanDevice® 2.4GHz AN-mV
11Pages

2.4GHz AN-mV Wireless IOT Data Acquisition (DAQ) Instrument low voltage inputs (±20mV) | built-in datalogger Product Video user guide quick start mechanical drawing Main Features • Analog inputs ±20 mV (4 channels) • Wireless transmission IEEE 802.15.4 with antenna diversity + - • Embedded data logger up to 1 million data points • Integrated rechargeable Lithium-Ion battery • Integrated sensor power supply, software configurable 4.5V to 20V • Measurement repeatability less than ± 0.025% on the full scale

Structural Health Monitoring Condition monitoring

EMBEDDED DATA LOGGER UP TO 1 MILLION DATA POINTS The BeanDevice® 2.4GHz AN-mV integrates an embedded data logger, which can be used to log data when a Wireless Network can not be easily deployed on your site. All the data acquisitions are stored on the embedded flash and then transmitted to the Wireless receiver (BeanGateway® 2.4GHz) whenever a Wireless Networks is established. The datalogger function is compatible with all the data acquisition mode available on your BeanDevice® 2.4GHz AN-mV • Low Duty Cycle data acquisition with a measurement heartbeat from 1s to 24h • Alarm data...

Remote configuration & monitoring The BeanScape® 2.4GHz software helps the user to view all the data measurements transmitted by the BeanDevice® 2.4GHz AN-mV. Different data acquisition modes can be remotely configured from the software: • Low Duty Cycle Data Acquisition mode (LDCDA) : the data acquisition is immediately transmitted by radio. The transmission frequency can be configured from 1s to 24h. • Alarm Mode : the measured value is transmitted by radio whenever an alarm threshold (fixed by the user) is detected (3 alarms threshold levels are available Alert-Action-Alarm ). The device...

CONFIGURABLE SENSOR POWER SUPPLY The sensor is directly powered by a high accuracy and adjustable DC/DC converter integrated inside the device. The excitation voltage is remotely configurable through the BeanScape® 2.4GHz (4.5 to 20V). GETTING started WITH A WIRELESS IOT SENSORS The BeanDevice® 2.4GHz AN-mV operates only on our Wireless IIOT Sensors , you will need the BeanGateway® 2.4GHz and the BeanScape® 2.4GHz for starting a wireless IIOT sensors OPC server is only available on the Beanscape® 2.4GHz Premium + OR Wireless IIOT Sensors Supervision software Product specifications are...

TECHNICAL SPECIFICATIONS PRODUCT REFERENCE BND-2.4GHZ-AN-MV-4CH Analog data acquisition specifications Signal Conditionning Number of analog inputs A/D Converter Analog low voltage mV, suitable for Strain Gage based sensors 4 Channels 16 bits - SAR Architecture (Successive Approximation Register) with temperature compensation ±20 mV (bipolar) or 0-40 mV (unipolar) ± 0.5 LSB less than ± 0.025% Measurement range Non-linearity error Repeatability (full scale, @ 25°C, Static Measurement Mode every 2s) Repeatability (full scale, @ 25°C, Dynamic Measurement Mode 10Hz) Sensor Connector Sensor...

2.4GHz AN-mV TECHNICAL SPECIFICATIONS Configurable settings from the BeanScape® 2.4GHz software Data Acquisition mode Static Data Acquisition : Low Duty Cycle Data Acquisition (LDCDA) and Alarm Mode (based on alarm thresholds) . Measurement heartbeat 1s to 24 hour Dynamic data acquisition (not available on devices with ref. extension XT ) Streaming and S.E.T. (Streaming with Event Trigger) Mode Sampling Rate (SPS = samples per second) Alarm Threshold Sensor power supply Power Mode Minimum: 1 SPS Maximum: 400 SPS maximum per channel 3 levels of Alarm Threshold Alert-Action-Alarm 4.5 to 20...

2.4GHz AN-mV TECHNICAL SPECIFICATIONS Power supply Integrated battery charger Integrated Lithium-ion battery charger with high precision battery monitoring : • Overvoltage Protection, Overcurrent/Short-Circuit Protection, Undervoltage Protection • Battery Temperature monitoring • During data acquisition : 70mA to 130 mA (depends on external sensor power supply) • During Radio transmission : 70 mA • During sleeping: < 35 µA External power supply : +8-28 VDC with polarity inversion protection High density Lithium-Ion rechargeable battery with a capacity of 2.2Ah with polyswitch protection...

High Gain antenna option Calibration certificate High Gain Omnidirectional antenna Frequency range 2400-2500MHz VSWR < 1.4, Impedance 50 Ohm, Polarization Vertical Vertical plane 24°(7dBi Gain version) 16°(7dBi Gain version) 6°(12dBi Gain version), Horizontal plane 360° Connector N female, Wind load (170km/h) 7.3N Included: N-Type cable (Male/Male), length: 1 meter Gain: 7dBi, Dimensions 360mm x 23mm, Weight 0.44 kg Ref: HG-OMNI-OUT-7DBI Gain: 9dBi , Dimensions 540x23 mm, Weight 0.61 kg Ref: HG-OMNI-OUT-9DBI Gain: 12dBi , Dimensions: 1125mm x 19 mm, Weight 1.06 kg Ref: HG-OMNI-OUT-12DBI...

2.4GHz AN-mV Sensor Wiring Code M12 Socket Pin assignation M12 Socket Positioning Notch Sensor Chanel Label positioning notch Wiring Code (Sensor Side)-Sensor with Analog Unipolar Output PIN 2: sens- CAPTION PIN 2 : Connected to Electrical Ground PIN 3 (Gnd) : Electrical Ground M12-4Pins Plug PIN1 ( Pwr+) : Sensor power supply PIN 4 (Sens +) : Sensor Signal + input Wiring Code (Sensor Side)-Sensor with Analog Bipolar Output PIN2: sens- CAPTION PIN2 : Sensor signal - input PIN1 ( Pwr+) : Sensor power supply PIN3 (Gnd) : Electrical Ground PIN4 (Sens +) : Sensor Signal + input If you use a...

2.4GHz AN-mV Accessories AC/DC Power supply with M8 Plug Ref:M8-PWR-12V - Wall plug-in power supply, Output: 12VDC, M8-3Pins plug - AC Power plug: Europe/UK Northamerica /China/Australia - Waterproof - IP67 N-Type cable (Male/Male) Omnidirectiona antenna 5dBi for outdoor use Ref: CBL_ANT_XXM . length: 1 meter / 2 meters / 5 meters . Cable type: RF-5/H155 Molded Cable with M8 plug Ref: HG_OMNI_5_OUT_DBI - Waterproof design - Outoor use - Professional N-type design reduces stress - N-type, Male, Reverse Polarity, - VSWR < 2.0 / Length=95mm - Wind survival: up to 180Mph Watertight IP65 -...