2.4GHz AN-mV Wireless IOT Data Acquisition (DAQ) Instrument low voltage inputs (±20mV) | built-in datalogger Product Video user guide quick start step file mechanical drawing Main Features • Analog inputs ±20 mV (4 channels) • Embedded data logger up to 1 million data points • Wireless transmission IEEE 802.15.4 with antenna diversity • Integrated rechargeable Lithium-Ion battery • Integrated sensor power supply, software configurable 4.5V to 20V • Measurement repeatability less than ± 0.025% on the full scale

Structural Health Monitoring Condition monitoring Remote Monitoring

iBeanAir WIRELESS HOT SENSORS EMBEDDED DHTH LOGGER UP TO 1 MILLION DRTR POINTS The BeanDevice® 2.4GHz AN-mV integrates an embedded data logger, which can be used to log data when a Wireless Network can not be easily deployed on your site. All the data acquisitions are stored on the embedded flash and then transmitted to the Wireless receiver (BeanGateway® 2.4GHz) whenever a Wireless Networks is established. The datalogger function is compatible with all the data acquisition mode available on your BeanDevice® 2.4GHz AN-mV • Low Duty Cycle data acquisition with a measurement heartbeat from 1s to...

Remote configuration & monitoring The BeanScape® 2.4GHz software helps the user to view all the data measurements transmitted by the BeanDevice® 2.4GHz AN-mV. Different data acquisition modes can be remotely configured from the software: • Low Duty Cycle Data Acquisition mode (LDCDA) : the data acquisition is immediately transmitted by radio. The transmission frequency can be configured from 1s to 24h. • Alarm Mode : the measured value is transmitted by radio whenever an alarm threshold (fixed by the user) is detected (3 alarms threshold levels are available Alert-Action-Alarm ). The device sends...

CONFIGURABLE SENSOR POWER SUPPLY The sensor is directly powered by a high accuracy and adjustable DC/DC converter integrated inside the device. The excitation voltage is remotely configurable through the BeanScape® 2.4GHz (4.5 to 20V). GETTING started WITH A WIRELESS IOT SENSORS The BeanDevice® 2.4GHz AN-mV operates only on our Wireless IIOT Sensors , you will need the BeanGateway® 2.4GHz and the BeanScape® 2.4GHz for starting a wireless IIOT sensors Indoor Version OR Wireless IIOT Sensors Supervision software Outdoor Version Product specifications are subject to change without notice. Contact...

PRODUCT REFERENCE

Casing Aluminum, Waterproof IP67 - Fire Protection : ULV94/Getex casing dimensions (w/o antenna, w eyelets ) Shocks resistance 50g during 50 ms Norms • CE Labelling Directive R&TTE (Radio) ETSI EN 300 328 • ARIB STD-T66 Ver 3.6 ROHS - Directive 2002/95/EC

OPTIONAL ACCESSORIES AND SERVICES External Power Supply Wall plug-in, Switchmode power Supply 12V @ 1.25A with sealed M8 Plug (IP67/Nema 6) M8 extension cable for external power supply Molded cable with M8-3pins male plug Material : PVC with shield protection IP Rating : IP67 | Nema 6 Cable length : 2 meters , Ref: CBL-M8-2M Cable length : 5 meters, Ref: CBL-M8-5M Cable length: 10 meters, Ref: CBL-M8-10M M12 Plastic ABS plug for sensors M12-4 Pins Male plug for sensor interface Coding : A , Locking type: Fix screw, Material : Plastic ABS IP Rating: IP67 in locked condition Ref: M12-PL-SENSOR...

OeanAir WIRELESS HOT SENSORS High Gain antenna option • Beangateway is positioned in Line Of Sight toward sensor (no obstacles, no radio interferences) with High Gain Antenna, with a Height of 3 meters minimum. 26dBm High Gain Directional Antenna is used om gateway side. • On sensor side : Radome Antenna should point to Vertical Direction for better Coverity

2.4GHz AN-mV Sensor Wiring Code M12 Socket Pin assignation M12 Socket Positioning Notch Sensor Chanel Label positioning notch Wiring Code (Sensor Side)-Sensor with Analog Unipolar Output NOTCH PIN 2: sens- CAPTION PIN 2 : Connected to Electrical Ground PIN 3 (Gnd) : Electrical Ground M12-4Pins Plug PIN1 ( Pwr+) : Sensor power supply PIN 4 (Sens +) : Sensor Signal + input Wiring Code (Sensor Side)-Sensor with Analog Bipolar Output NOTCH PIN2: sens- CAPTION PIN2 : Sensor signal - input PIN1 ( Pwr+) : Sensor power supply PIN3 (Gnd) : Electrical Ground PIN4 (Sens +) : Sensor Signal + input If you...

BfeanAir WIRELESS HOT SENSORS AC/DC Power supply with M8 Plug - Wall plug-in power supply, - AC Power plug: Europe/UK Northamerica /China/Australia N-Type cable [Male/Male] Ref: CBL_ANT_XXM . length: 1 meter / 2 meters / 5 meters . Cable type: RF-5/H155 Omnidirectiona antenna 5dBifor outdoor use Ref: HG_OMNI_5_OUT_DBI - Waterproof design - Professional N-type design reduces stress - N-type, Male, Reverse Polarity, - Wind survival: up to 180Mph Watertight IP65 Molded Cable with M8 plug Ref:CBL-M8-2M (cable length : 2 meters) - CBL-M8-5M (cable length : 5 meters) - CBL-M8-10M (cable length : 10...