Wireless Industrial IOT Temperature Sensors | built-in datalogger APPLICATION VIDEO EcoSensor USER GUIDE QUICK START MECHANICAL DRAWING Embedded data logger : up to 1 million data points • Ultra-low power technology IEEE 802.15.4 (up to 7-year battery life) Max wireless range: 300m (L.O.S.) • Temperature measurement range : • High & standard accuracy silicon temperature sensor • Watertight IP67 polycarbonate enclosure Weight : 120g, • Primary cell capacity: 2200 mAh (AA size) Lithium-thionyl chloride technology

Wireless IOT Temperature Sensors BND-2.4GHZ-ONE-T-HAEY (Length 50 mm, Diameter 6 mm, Hole diam. 5.3 mm) Wireless IOT Temperature Sensors BND-2.4GHZ-ONE-T-HA Wireless IOT Temperature Sensors BND-2.4GHZ-ONE-T-ST Wireless IOT Temperature Sensors BND-2.4GHZ-ONE-T-ST-CL Wireless IOT Temperature Sensors BND-2.4GHZ-ONE-T-STCORE -50°C to +150°C Stainless steel handle length 9.5cm Diameter 9mm Temp. core probe length 13.5 cm Diameter 6mm

Medical lab & white room Medical lab & white room Environmental Monitoring EMBEDDED DATA LOGGER UP TO 1 MILLION DATA POINTS The BeanDevice® 2.4GHz One-T integrates an embedded datalogger, which can be used to log data when a Wireless IIOT Sensors can not be easily deployed on your site. All the data acquisition are stored on the embedded flash and then transmitted to the BeanGateway® 2.4GHz when a network is established. The dataLogger function is compatible with all the data acquisition mode available on your BeanDevice® 2.4GHz One-T : • LowDutyCycle Data Acquisition • Survey

2.4GHz ONE-T EXAMPLE : COLD CHAIN TRACEABILITY • In standalone operation, the BeanDevice® 2.4GHz One-T stores all the measurements on its embedded datalogger. Thus, a direct connection with the BeanGateway® 2.4GHz is not needed. • When the the truck starts moving, the local temperature is monitored and all the acquired measurements are stored on datalogger. • Data logs can be transmitted to the BeanGateway® 2.4GHz on request. Once a successful transmission is done, the user can choose to erase automatically the logs from the datalogger memory, so new ones can be stored. For further information...

2.4GHz ONE-T Accurate silicon temperature Sensor (Standard Accuracy version) ACCURACY COMPARISON BETWEEN THE BEANDEVICE ONE-T STANDARD ACCURACY VERSION AND PLATINUM SENSORS 2 Temperature DIN A sensor DIN B sensor silicon temperature sensor The figure above illustrates the accuracies of the BeanDevice® 2.4GHz One-T standard accuracy version and DIN A and DIN B platinum sensors. In the standard calibration the BeanDevice® 2.4GHz One-T is in the range between 10°C and 110°C more accurate than the DIN B platinum sensor. An outstanding long term stability makes sure that the accuracy will remain in...

BND-2.4GHZ-ONE-T-SA-CL SA-temperature sensor accuracy & design CL-Sensor Cable length ■ ST : standard accuracy Sensor cable length in cm ■ HA: High accuracy Maximum cable length: 150 cm ■ HAEY: High accuracy with eyelet probe for wall mounting (minimum cable length 25 cm) STCORE: Temperature core probe with straight stainless steel Handle - standard accuracy (minimum cable length 25 cm) Example 1: BND-2.4GHz-ONE-T-S , wireless temperature sensor with 1 probe, standard accuracy (temperature range -25°C to +75°C), no cable length Example 2: BND-2.4GHz-ONE-T-HA-120, wireless temperature sensor with...

TECHNICAL SPECIFICATIONS TEMPERATURE SENSOR SPECIFICATIONS • Beangateway is positioned in Line Of Sight toward sensor (no obstacles, no radio interferences) with High Gain Antenna, with a Height of 3 meters minimum. 26dBm High Gain Directional Antenna is used om gateway side. • On sensor side : Radome Antenna should point to Vertical Direction for better coverity

The BeanDevice® 2.4GHz One-T operates only on our Wireless IOT Sensors , you will need the BeanGateway® 2.4GHz and the BeanScape® 2.4GHz for starting a Wireless IOT Sensors. Wireless IOT Sensors coordinator Outdoor Version ^feanScape® Wireless IOT Sensors Supervision Software

2.4GHz ONE-T Beandevice® One-T Overview EcoSensor Waterproof Antenna Network Reset non-contact push button Eyelet for wall mounting ON/OFF non-contact push button Temperature Sensor probe 2.4GHz ONE-T Product specifications are subject to change without notice. Contact Beanair for latest specifications Primary Cell Lithium-thionyl chloride primary cell (Li-SOCl2) 2,2 Ah Ref: PP2.2DMG

f^anDevice 2.4GHz ONE-T Headquarter: Email: Phone number: Buchholzer Strape 65, 13156 [email protected] +493066405051 Berlin, Germany Above given technical data are only for information purpose. BeanAir Sensors has right to change product specifications without notice.