2.4GHz HI-INC Wireless inclinometer Sensor | Tilt / inclination / Slope monitoring Product Video APPLICATION Video user guide quick start mechanical drawing step file Main Features • High precision bi-axis inclinometer with great measurement repeatability (±0.005° for bi-axis ±15° version, and ±0.006° for bi-axis ±30° version) • Embedded data logger : up to 1 million data points (with events dating) • Excellent radio link relying on the radio antenna diversity developed by Beanair® • Waterproof IP67 casing (Nema 6) • Time-synchronized wireless sensor networks (±2.5ms of accuracy) • Integrated Lithium-Ion battery charger

Structural Health Monitoring Condition Monitoring Land Surveying For further information about bridge monitoring, please read the following applications note : AN_RF_002 – “Bridge monitoring with BeanAir® products Time-Synchronized Wireless IIOT SensorS TimeSync function brings time-synchronization over the Wireless IOT Sensors (±2.5ms of accuracy between each wireless IOT sensor) and contributes to enhance user experience about correlation of remote sensing data and modal analysis. Clock Transmission Wireless IOT Sensors Supervision Software Document version: V4.9 Wireless IOT Sensors coordinator...

2.4GHz HI-INC Remote Configuration & Monitoring BeanScape® Basic The BeanScape® application allows the user to view all the data transmitted by the BeanDevice® 2.4GHz HI-INC. Thanks to the OTAC (Over-the-Air configuration) feature, the user can remotely configure the BeanDevice® 2.4GHz HI-INC. SEVERAL DATA ACQUISITION MODES ARE AVAILABLE ON THE BEANDEVICE® 2.4GHz HI-INC : • Low Duty Cycle Data Acquisition mode (LDCDA) : the data acquisition is immediately transmitted by radio. The transmission frequency can be configured from 1s to 24h. • Survey Mode: the measured value is transmitted by radio...

2.4GHz HI-INC Embedded data logger up to 1 million data points The BeanDevice® 2.4GHz HI-INC integrates an embedded datalogger, which can be used to log data when a Wireless IOT Sensors can not be easily deployed on your site. All the data acquisition are stored on the embedded flash and then transmitted to the BeanGateway® 2.4GHz when a Wireless IOT Sensors is established. The data logger function is compatible with all the data acquisition mode available on the BeanDevice® 2.4GHz HI-INC : • LowDutyCycle Data Acquisition • Survey • Streaming packet EXAMPLE : TILT MONITORING ON A BRIDGE • In...

2.4GHz HI-INC TECHNICAL SPECIFICATIONS PRODUCT REFERENCE BND-2.4GHZ-HI-INC-MR-PS MR – Measurement Range 15B : bi-axial ±15° 30B : bi-axial ±30° PS - Power Supply RB : Internal rechargeable battery XT : External Power supply Example 1: BND-2.4GHZ-HI-INC-15B-RB - wireless bi-axial inclinometer with ±15° measurement range, internal rechargeable battery Example 2: BND-2.4GHZ-HI-INC-30B-XT - wireless bi-axial inclinometer with ±30° measurement range, external primary cell Sensor specifications Inclinometer Technology Measurement resolution (Bandwidth 10 Hz) Noise density Measurement Repeatability...

2.4GHz HI-INC TECHNICAL SPECIFICATIONS RF Specifications Wireless Protocol Stack WSN Topology Data rate RF Characteristics TX Power Receiver Sensitivity Maximum Radio Range Antenna Ultra-Low-Power and license-free 2.4Ghz radio technology (IEEE 802.15.4E) Point-to-Point / Star 250 Kbits/s ISM 2.4GHz – 16 Channels. Antenna diversity designed by Beanair® +18 dBm -104dBm 500 m in Line-Of-Sight 30-100 m in Non-Line-of-Sight Omnidirectional radome antenna with antenna diversity Gain : 3 dBi Waterproof IP67 Embedded Data logger Storage capacity Wireless data downloading up to 1 millions data points...

2.4GHz HI-INC TECHNICAL SPECIFICATIONS Power supply Integrated battery charger Integrated Lithium-ion battery charger with high precision battery monitoring : • Overvoltage/Overcurrent/Short-Circuit/ Undervoltage protection • Battery Temperature monitoring • During data acquisition : 30 to 40 mA • During Radio transmission : 80 mA @ 18 dBm • During Battery Saver Mode : < 38 µA 8-28VDC with reverse polarity protection High density Lithium-Ion rechargeable battery with a capacity of 950 mAh Current consumption @3.3V External power supply Rechargeable battery Included accessories 1x Magnet to Power...

2.4GHz HI-INC Getting started with a Wireless IIOT SensorS The BeanDevice® 2.4GHz HI-INC operates only on our Wireless IOT Sensors, you will need the BeanGateway® 2.4GHz and the BeanScape® 2.4 GHz for starting a wireless IOT sensors. Wireless IOT Sensors coordinator Indoor Version OR Wireless IOT Sensors Supervision Software Wireless IOT Sensors coordinator Outdoor Version Rethinking Sensing Technology For further information about BeanDevice® battery life : TN-RF-002 Current consumption in active & sleeping mode TN-RF-012 Beandevice autonomy in Streaming and Streaming Packet Mode Beandevice®...

2.4GHz HI-INC External Power supply wiring code M8 Socket (A-Coding) - Pin Assignation Pin 4 Pwr+ (4VDC) Xtend version only Pin 3 Pwr+ (8-28VDC) Interface Name Power Supply 8-28VDC Power Supply 4VDC (available on Xtend version only) Ground Wire Color (A-coding) Blue Black Brown M8 Plug (A –Coding) - Pin Assignation Pin 1 Gnd Pin 4 Pwr+ (4VDC) Xtend version only Pin 3 Pwr+ (8-28VDC) Do not power PIN4 and PIN3 at the same time, you will damage your Beandevice External Power-Supply External Battery Pack High efficiency solar panel with solar charging controller and Lead-acid battery Ref: X-SOL-SLP-VOUT-CL...